How to use a high-power, high-capacity DF collector magnetic stirrer

DF collector magnetic stirrer, is a new type of magnetic stirrer developed by our factory, the product in the domestic major universities laboratories to promote the trial effect is good, well received
by users.

Collector pot made of stainless steel stamping, with the characteristic heating pipe and high temperature seal combination, can add water (water bath), refueling (oil bath), has been dry burning, is also the main advantage of the machine, heating part and electrical box between the use of heat dissipation plate isolation, under the high temperature heating and stirring, does not affect the electrical performance
of the whole machine.

According to user requirements, customized large and small capacity collector stirrer.

How to use the power large-capacity DF magnetic stirrer: 1, in the work of the stirrer appears jumper phenomenon, must be turned off after the stirring switch to reopen, the speed from slow to fast, slowly adjust the stirring speed will make the stirring return to normal
.

2.
Before turning on the power, you need to prepare
the cup.

Next, open the stainless steel container lid, place the cup in the middle of the stainless steel container, add heat transfer oil or silicone oil to it, and put the stirrer into the
cup solution.

Finally, turn on the power switch, the indicator light is on, the speed regulation potentiometer rotates clockwise, the stirring speed is from slow to fast, must be equalized, can not be fast and slow, which will cause great damage
to it.

3, when you need to heat, connect the temperature sensor probe, clip the probe to the bracket, move the bracket so that the temperature sensor probe is inserted into the solution of not less than 5 cm, but can not affect the stirring, open the temperature control switch, set the required temperature, according to the thermometer on the +, - set the need for constant temperature temperature, the head of the digital display value is the actual temperature in the cup, heating stop, automatic constant temperature, collector magnetic stirrer instrument can be continuously heated for a long time
.

DF-101T type High-power and high-capacity magnetic stirrer Precautions: 1, stainless steel containers are not added to the heat transfer oil and when the temperature sensor is not connected, please do not open the temperature control switch, so as to avoid damage
to the electric heat pipe and thermostat.

2, a long time constant temperature, must have a duty officer on duty
.

Use a three-phase safety socket when using a collector magnetic stirrer and properly ground it
.

3, the use of the instrument should be kept clean, long-term use should not cut off the power supply
.