How to use the solid density meter and the points to pay attention to

How to use the solid density meter and pay attention to the points A solid density meter is an instrument composed of an electronic balance, density software, and density accessories
.

Next, let's take a look at the process of its use and the points to pay attention to in the use process
.

How to use 1.
In the state of displaying 0.
000g, put the product into the measuring table, after the display is stable, press the ENTER key to memorize, and the display status symbol M1 will change to M2; 2.
Place the measuring object in the center of the measuring table, 3.
Put the product into the water, after the display is stable, press the ENTER key to memorize, the status symbol M2 disappears, and the triangle symbol points to the mark SG, that is, the density value is displayed
.

4.
Avoid accidentally dropping water droplets on the measuring table during the test, otherwise it will affect the accuracy of the measured value.
Precautions for the use of the density meter affect the measurement results
.

2.
Do not use organic solvents to wipe the electronic density meter.
3.
Avoid the penetration of dust and water into the electronic density meter.
Pay attention to the daily maintenance of the electronic density meter
.

 　　4.
Avoid accidentally dropping water droplets on the measuring table during the test, otherwise it will affect the accuracy of the measured value
.

 　　5.
If it has not been used for a long time, the water in the sink should be emptied and wiped clean to prevent air bubbles from adhering to the sink
.

 　　6.
During the measurement process, put the objects on the hanging rail into the water, and ensure that there are no air bubbles on the surface of the sample to be measured
.

 　　7.
Avoid falling and hitting the electronic densitometer
.

 　　8.
Before each measurement, press the reset key to reset to zero to avoid measurement errors
.

 　　9.
Do not place the electronic densitometer in direct sunlight or near air conditioners, and do not place the electronic densitometer in places with strong magnetic strength and dusty places
.

 　　10.
When operating, it should be handled with care, and the measuring object should be placed in the center of the measuring table
.

 　　The above is the relevant introduction about the use method and precautions of the solid density meter, according to the corresponding use process and pay attention to certain points of use, so as to ensure the accuracy of the value, I hope to help everyone
.