Industrial water-cooled chiller lubrication treatment

Industrial water-cooled chillers in addition to regularly do a good job of dirt treatment, there is also the need to do a good job of lubrication.
because the machine has been in use for a long time, the lubricant may drop or go bad, it should be added new lubricants.
method is used to lubricate industrial water-cooled chillers? Prepare a funnel-shaped drip oiler and find out where to refuel, which is more targeted.
the lubricant to the machine parts that should be refueled, or fill the oil jug with oil on time.
this method is called drip lubrication.
Oil ring lubrication method, oil ring meaning you should be able to think, is to use the axis that can rotate, drive the activity of the oil ring on the shaft, this time the oil ring will rub the oil in the oil pool in the track of the cycle.
compressors with no cross heads can be lubricated with splashes.
method is by the oil rod mounted on the connecting rod to throw oil off and splash to the lubrication site lubrication, where Jiangsu Guanya reminded that the cylinder and sports body can only use the same lubricant.
the oil is not good filtration, operation is not convenient, industrial water-cooled refrigeration oil level must be strictly controlled.
large, medium-sized compressors with crossheads mostly use pressure lubrication.
is to mechanically automatically lubricate the oil pressure.
above is about cleaning up the dirt of industrial water-cooled chillers and lubrication methods, for different situations to adopt a more appropriate method.