Installation and fixing method of fiber filter

Fiber filter is a high-precision filter, so when you use it, installation and fixation is very important, so how to do it? Let Xiaobian tell you The anchor plate embedded in the foundation must be fixed or welded with anchor bolts on the horizontal foundation After the equipment is installed, its horizontal deviation shall not be greater than 5mm Pipeline connection: after installation, the valves at each pipe orifice and the external connecting pipeline can be installed Before the installation of valves and pipelines, the inner surface of pipelines and flange connection surface shall be cleaned to prevent the filter layer from being polluted by rust, oil and other dirt In the equipment workshop, open channel sewage ditch can be arranged, and the upper opening of the ditch shall be covered with a cover plate And the main air inlet pipe of the equipment must be higher than the Zui high point of the filter to prevent the water from flowing into the roots blower when the cleaning operation is wrong If the requirements cannot be met, a check valve shall be installed on the air pipeline.