Installation instructions for electronic multifunctional water processor

Based on the formation mechanism of scale, the electronic multifunctional water processor uses the high-frequency electromagnetic oscillation generated by electronic circuit to form high-frequency electromagnetic field between fixed electrodes When the water flowing through the electromagnetic field absorbs high-frequency electromagnetic energy, the microstructure and physical properties of water are changed, and the activity of water is enhanced The product has little external magnetic interference and obvious treatment effect on water Zui finally plays the role of descaling, scale prevention, sterilization and corrosion alleviation 1 Installation instructions (1) all water in the system must be able to flow through electronic water treatment (2) there is no directionality in the water flow of the electronic water processor, and there is no entrance or exit The user can set the entrance or exit as required (3) filter shall be installed separately when electronic water processor is used (4) in general, the series of electronic water processors can not be set with bypass, and the filter screen installed separately shall be backwashed regularly (5) the electronic water processor can be installed vertically, horizontally or obliquely (6) the main machine and the auxiliary machine can be installed in one or separately When it is installed separately, the main engine can be moved to a place convenient for observation and maintenance, and the connecting coaxial line between the main and auxiliary engines generally does not exceed 5m (7) the new system and the old system with serious scaling must be cleaned before installation (8) when installing the electronic water processor, please pay attention to protect the anode in the water processor and avoid collision 2 Installation position: the electronic water processor shall be installed behind the water pump outlet, close to the pipeline and water equipment to be treated (1) for the central air conditioning system of chiller type, an electronic water processor is installed on the pipeline of cooling circulating water and refrigerant water (2) for heat pump unit type central air conditioning system, an electronic water processor is installed on the refrigerant water pipe (3) for industrial cooling system, an electronic water processor shall be installed on the front pipe of the equipment to be cooled in the city (4) for the heat exchange system, an electronic water processor is installed on the hot return water pipeline and the cold water supply pipeline (5) for the hot water boiler system, an electronic water processor shall be installed on the cooling water pipe and heating water pipe The power supply of the electronic water treatment equipment is 220V / 50Hz, only the 220V three core socket near the installation place of the electronic water treatment is required 3 Installation steps (1) for the new system, the installation position shall be reserved according to the size of the selected electronic water processor in the design For the old system, the installation position shall be cut out on the pipeline, and the size shall be consistent with the selected electronic water processor (2) the two flanges corresponding to the flange of the electronic water processor shall be sleeved on the pipeline respectively (3) use the lifting device to lift the electronic water processor in place (4) install the gasket between the pipeline flange and the flange of electronic water treatment, adjust the position, fix it with bolts, tighten it preliminarily, then weld the pipeline flange, and tighten the bolts after the welding and cooling.