Installation, use and maintenance of swing granulator

Installation instructions for swing granulator 1 This machine is packed as a whole After unpacking, it can be moved to a proper place for use It can be used after being leveled 2 The device of the electrical circuit is not limited by the rotation direction The circuit is connected to the switch through the belt cover under the base and clamped by the wire clamp Instructions for use of swing granulator 1 Use method: start the machine, pour the mixture into the hopper, and form particles through the screen by the swing effect of the rotary drum For example, the crushed blocks should be added gradually, not filled up, so as to avoid excessive pressure and make the screen vulnerable 2 Precautions: if the powder in the powder hopper can not be stopped, it is not allowed to shovel, so as to avoid hand injury accident Bamboo chip shovel or parking shall be used Maintenance instructions for swing granulator 1 Regularly check the parts, once a month, check whether the worm wheel, worm, bearing and other moving parts are flexible and worn If any defect is found, it shall be repaired in time and shall not be used reluctantly 2 The machine shall be placed in a dry and clean room, and its atmosphere shall not contain acids and other places with corrosive gas flow to the parts 3 After the first use of the machine or when it stops working, take out the rotary drum to clean or brush the remaining powder in the bucket, and then install it to make preparations for the next use 4 If the machine is out of service for a long time, the whole body of the machine must be wiped clean, the smooth surface of the machine parts shall be coated with antirust oil and covered with a cloth