Instructions for use of full automatic shot making machine

Automatic pill making machine is a very common equipment in modern pharmaceutical industry After years of continuous development and transformation, automatic pill making machine has been widely used in pharmaceutical laboratories, pharmaceutical factories, health food factories, hospital preparation rooms, clinics, pharmacies and other places, and has the advantages of small size, light weight, stable operation and so on In the process of using the full-automatic shot making machine, as the user, the following precautions should be understood to ensure its operation, including: 1 Before using the full-automatic pill making machine, first remove the upper cover shell, add several drops of water-free edible oil at each oil hole, and then scrub four rollers and the parts contacting with the pill with medical alcohol for disinfection 2 Close the cover and gearbox cover, reinstall and reset them, turn on the power supply, turn on the switch, and turn the machine idle for 1-2 minutes 3 Put the evenly distributed agglomerated charge into the extruder, draw out the strips, and then put the strips crosswise in the pill making groove to directly rub them into pills 4 Coating: after the pill is made, it can be put in the water pill coating device and wrapped into white, red and other coats 5 Polishing method: put the pill in the water pill coater and roll continuously The longer rolling time is, the smoother the surface is 6 Drying method: after the pill is made, put the pill into the water pill coating device for electric heating or drying, or dry it with the hot air of the electric dryer, or directly in the sun 7 In the process of use, the operation shall be carried out in strict accordance with the relevant product instructions, and it is strictly prohibited for untrained personnel to operate the equipment without permission 8 During the operation, keep the worktable free of any irrelevant items, but confirm the power supply voltage, and take effective grounding measures 9 Do not put foreign matters into the running full-automatic shot making machine to avoid affecting normal operation 10 If the full-automatic shot making machine is not used for a long time, it shall be placed in a reliable and clean position, and the corresponding anti-corrosion and anti rust work shall be done More about the use of automatic shot machine precautions, consultation!