Introduction of the instrument for testing the initial viscosity of related materials

Constant temperature initial adhesion testing machine Model: CNY-1H serial number Technical parameters 1 Equipment use: used for non-metallic materials such as self-adhesive, rubber, plastic, textile, waterproof material, non-woven fabric and metal wire, metal foil, metal Tensile, peel, tear, compression and other mechanical properties tests of the shee.
21 Equipped with corresponding fixtures according to the test requirements, which can be used for initial adhesion, tensile, peeling and other tests; a set of tensile fixtures are standard (according to the user’s sample requirements) 2 Maximum load: 1KN; load accuracy: the indicated value Within ±1%; Sampling frequency: 1KHz; 3 Effective stretching space: 300mm; Effective test width: The distance between the test column and the center of the sensor is 60mm; Driver; 7 It has the functions of automatic load retention, stress and strain control, sample protection and overload protectio.
8 The size of the whole machine is small and the operation is simple; 9 Software: input various parameters of the sample, the software can automatically complete the experiment according to the standard; the test data can be analyzed to obtain the mechanical performance index of the sample; 31 Adapt to different types of hot melt At least 2 sets of fixtures required for the glue constant temperature test; 2 Computer for analysis and control, 1 set; 3 One set of constant temperature box, which can match the equipment to test the initial adhesion of hot melt adhesive in high temperature environment (50℃-150℃) forc.
41 On-site installation and commissioning by technicians authorized by the instrument manufacturer, acceptance of the technical indicators of the instrument, and acceptance report attached; 2 The instrument manufacturer has experienced maintenance engineers and technical application support engineers in China; 3 Warranty starts from the installation of the instrument Free warranty for two years from the date of qualified commissionin.
After the warranty period, long-term supply of spare parts and normal after-sales service should be guarantee.
5Training requirements: During the installation and acceptance period, on-site training on the basic operation and routine maintenance of the instrument is provided to the user at the user's location, including the principle of the instrument, the use method and the maintenance method,et.
6 Verification requirements: The equipment must be a brand-new, unused, original and complete set of qualified products
71 (if necessary) provide the verification (calibration) certificate issued by Party A's third-party organization with verification qualification.
2 A complete set of product manuals, operation manuals and spare parts manuals shall be provided upon deliver.
If the products submitted by the bidder are imported equipment, the "Customs Declaration of the People's Republic of China for Imported Goods" and the "Certificate of Origin" shall be provided at the same tim.
.Tag: constant temperature initial adhesion testing machine