-
Categories
-
Pharmaceutical Intermediates
-
Active Pharmaceutical Ingredients
-
Food Additives
- Industrial Coatings
- Agrochemicals
- Dyes and Pigments
- Surfactant
- Flavors and Fragrances
- Chemical Reagents
- Catalyst and Auxiliary
- Natural Products
- Inorganic Chemistry
-
Organic Chemistry
-
Biochemical Engineering
- Analytical Chemistry
- Cosmetic Ingredient
-
Pharmaceutical Intermediates
Promotion
ECHEMI Mall
Wholesale
Weekly Price
Exhibition
News
-
Trade Service
LX-8503B side pressure sampler is a special sampling instrument for corrugated cardboard edge compressive strength test and adhesion strength test, which can quickly and accurately cut the standard test size, and is an ideal auxiliary test instrument for corrugated cardboard and carton production, scientific research and quality supervision and inspection
.
Product features: imported sliding track, closely matched with the blade imported from Japan, easy to cut out multi-layer cardboard samples; It can cut the sample with accurate parallelism, with a notch, and the parallel spacing can be set; The scale is laser engraved, the scale is clean, wear-resistant, easy to clean; The blade is easy to install
thanks to the powerful magnet.
Notes: 1.
The incision direction must be parallel or perpendicular to the corrugated direction, and the test specimen must not be loosened during the cutting process; 2.
After each cut, pull the handle back to the position to be cut; 3.
It is strictly forbidden to put the hand in the cutting position to prevent injury; 4.
If the incision of the cut specimen is severely curled or deflected, the blade
should be replaced.
The blade used can be any commercially available blade of the same type (replacement method: loosen the screw on the tool holder assembly, remove the old blade, replace the new blade and adjust the blade position and angle, tighten the screw); 5.
When not used for a long time, the blade, guide column, etc.
should be coated with anti-rust oil, and covered with dust-proof; 6.
Guide sleeve assembly and guide column should be filled with a small amount of lubricating oil
frequently.
Product specifications: Model name LX-8503B side pressure cutting knife sampling size 25*100mm (side pressure sample) / 25*80mm (bonded sample) sampling size error±0.
5mmLarge sampling length 220mm Large sampling thickness 18mm adjustable spacing 25, 30, 80, 100,120 mm cutting depth< 8mm weight 36kg Overall dimension (length * width * height) 430 * 380 * 200mm Label: side pressure sampler
