It is very important to clean up the pelletizer

The automatic pill making machine is suitable for small pharmaceutical factory, trial production room of large TCM factory, TCM Research Institute, TCM Research Institute, hospital, private clinic, TCM shop (room), on-site processing of tonic sales counter and pill food development of food factory In daily use, the cleaning work of the pelletizer is very important, which directly affects the efficiency and service life of the pelletizer! 1 Cleaning frequency: (1) clean and disinfect once before and after production; (2) clean and disinfect according to this procedure when changing varieties; (3) clean and disinfect thoroughly after maintenance 2 Cleaning tools: basin, brush, tweezers, stainless steel knife, cleaning cloth, rubber gloves 3 Detergent and disinfectant: (1) detergent: 5% detergent solution; (2) disinfectant: 75% ethanol solution or 0.1% Bromogeramine solution, alternately used every month 4 Cleaning place: on site cleaning Remove the removed parts to the tool cleaning room for cleaning 5 Cleaning method (1) before production operation, clean the surface of pelletizer with cleaning cloth (2) after the completion of production, turn off all power supply and clean: ① reduce the speed of strip making and feeding machine to zero, and turn off the pill rubbing and servo motor Take off the inner cap of the striping barrel, turn on the frequency conversion of striping to the extrusion head below 10Hz for recycling, reduce the frequency conversion of striping to zero after Zui, and turn off the power supply ② take out the propeller and inner cap in the silo and wash them with drinking water ③ remove the flap, cutter and brush and wash them with drinking water ④ after the above parts are removed, the silo can be scrubbed with a cleaning cloth During scrubbing, attention shall be paid to prevent water from flowing into the electrical appliances inside the rack ⑤ scrub the whole machine with a clean cloth, and use liquid detergent if necessary ⑥ clean all parts and the whole machine with drinking water for three times, purified water for two times, and then use a dry cleaning cloth dipped in 75% ethanol for disinfection (3) fill in the cleaning record after cleaning, and ask the qa inspector to check the cleaning condition, sign and hang the "cleaned" sign after confirmation 6 Effect evaluation: there is no stain on the surface of the fuselage, and there is no residual medicine at the discharge port and propeller 7 Precautions: (1) one person shall operate the equipment to avoid accidents caused by more than one person operating the equipment, and keep the power off; (2) clean accessories shall be placed in a fixed position to prevent accidents such as disorderly handling or bumping (3) do not use alcohol, gasoline and other chemical thinners to clean the touch screen, so as to avoid damaging the touch screen surface.