Knowledge of the spraying of car paint.

Car paint classification
Minimalism) is not limited to art or design, it is a philosophy, values and way of life pursued by minimalists - "minimalist" way of life.
Southing method
color paint
pearl silver pink paint spray is sprayed three times: the first spray for fog spray, walking gun speed can be relatively fast, so that the repair area or the whole car like a mist-like spray, so that the paint can be glued to the medium paint coating film. The second spray cover in the paint or putty red ash layer, show color, pay attention not to have silver-pink paint spots, hair flowers and other problems appear, the speed of the gun can be slightly faster

. The third spray is to correct the color spots and other uneven spraying produced by the second spray. In general, it is standard to uniform the color cover of the repair area or the whole vehicle.
cover varnish
1, etc. paint spray after flash drying 5 to 15min, so that part of the solvent volatile, coating film becomes dry after spraying, you can use your fingers gently touch the coating film without color can spray the hood varnish. If the paint surface is rough or prevents dust. Wipe the blow-off edge with compressed air with a dust-removal cloth. Degreasing with a degreasing agent after wiping (known in the industry as degreasing).
2, the first spray of the hood varnish to fog spray-based, can not be sprayed too thick, to a slight degree of gloss spray, spray gun can run slightly faster.
3, the second time the hood paint spray is decorative, to spray brightness; Sprayed overlappingly with a two-way (back and forth) spray method, the spray gun operates at a normal or slightly slower speed.
one is a single operation one is a two-
single operation: that is, plain paint.
two-process is metal paint: . Car paint s1 . . .
metal paint can only provide particles, because it contains aluminum powder or mica looks good, but it does not have hardness and gloss so it is not available to use alone, must be sprayed on the metal paint varnish to have luster and hardness, to achieve the role of protection. So why plain paint can be molded again is because he is a color varnish thus eliminating the step of painting varnish, the role of two gasoline paint is basically the same, is one more process to provide a better visual effect. No matter what color of car paint, its pigment will fade in the sun. In fact, it's not just paint, any colored object can fade in the sun. At this point, it is important to add additives to the paint. For example, light stabilizers, such as antioxidants or something. But in fact, there is no paint that doesn't fade.
.