Medicinal grade sorbitan oleic acid cas1338-43-8 disc 80 use

Medicinal grade oleic acid sorbitan cas1338-43-8 Sipan 80 use This product is a mixture of sorbitan and oleic acid ester, which is sorbitol dehydration, under an alkaline catalyst, and oleatelates are prepared; Or by sorbitol and oleic acid at 180 ~ 280 °C directly esterified and prepared
.
【Properties】This product is a light yellow to yellow oily liquid, with a slight odor
.
This product is insoluble
in water or propylene glycol.
Acid number The acid number of this product (general rule 0713) should not be greater than 8
.
Hydroxyl value The hydroxyl value of this product (general rule 0713) should be 190~215
.
Iodine value The iodine value of this product (General 0713) should be 62 to 76
.
Peroxide value The peroxide value of this product (general rule 0713) should not be greater than 10
.
Saponification value The saponification value of this product (general rule 0713) should be 145 ~ 160 (saponification time 1 hour).

S-201, soluble in oil and organic solvent, dispersed in water as a semi-emulsion liquid
.
2.
W/O type emulsifier, stabilizer, plasticizer, lubricant and desiccant in the production of medicine and cosmetics; In the textile industry, it is used as softener, antistatic agent and finishing agent; Also used as a mechanical lubricant; As an additive anti-fogging agent, it has good initial and low temperature anti-droplet properties, suitable for PVC (1 ~ 1.
5%), polyolefin film (0.
5 ~ 0.
7%), EVA film
.
3.
Used as mechanical lubricant, oil and coating industry emulsifier
.
S-401, soluble in oil and organic solvents, dispersed in hot water
.
2.
As an emulsifier and dispersant in the food and cosmetics industry; Emulsion stabilizer in emulsion polymerization; Printing ink as a dispersant; It can also be used as textile waterproof coating additive, oil emulsifying and dispersing agent; Widely used in polymer anti-fogging drops, PVC agricultural film 1 ~ 1.
7%, EVA0.
5 ~ 0.
7%.

S-601, this product is insoluble in water, hot water is dispersed, is a good w/o type emulsifier, with strong emulsification, dispersion, lubrication performance, but also a good stabilizer and defoamer
。 2.
Used as an emulsifier in the food industry, used in the production of beverages, milk sugar, ice cream, bread, pastries, malted milk, margarine, chocolate, etc.
; Used in the textile industry as an antistatic agent for acrylic fiber, a component of soft oiling agent; Used as an emulsifier and stabilizer in the food, pesticide, pharmaceutical, cosmetics, coatings and plastics industries; Used as an anti-fog droplet for films such as PVC, EVA, PE, etc.
, the dosage is 1.
5 ~ 1.
8% in PVC and 0.
7 ~ 1%
in EVA.
S-801, insoluble in water, soluble in hot oil and organic solvents, is a high-grade lipophilic emulsifier
.
2.
It is used for W/O type latex, nylon and viscose cord oil agent, which has a good smoothing effect
on fiber.
Used in machinery, coatings, chemicals, emulsification
.
As an emulsifier in oil drilling aggravated mud; as an emulsifier in the production of food and cosmetics; Dispersing agent in the paint and coating industry; Titanium dioxide is used as a stabilizer in the production of titanium dioxide; Pesticide production as insecticides, wetting agents, emulsifiers; As a co-solvent in petroleum products; It can also be used as a rust inhibitor
for rust oil.
Lubricants and softeners
for textiles and leather.
3.
As a film anti-fogging droplet, it has good initial and low temperature anti-fog droplet properties, and the dosage in PVC is 1-1.
5%, and the dosage in polyolefin is 0.
5-0.
7%.

S-851, slightly soluble in isopropyl alcohol, tetrachloroethylene, cotton oil, etc
.
2, mainly used in medicine, cosmetics, textiles, paints and petroleum industry, etc.
, used as emulsifiers, thickeners, rust inhibitors, etc