Nippon Innovative Technology: Exterior Wall Insulation System Technology Resistant to "Big Wind"

Summer is always accompanied by scorching sun and heavy rain.

Find the source of the problem: fatigue damage of inferior insulation

Every time a hot search occurs in extreme weather, incidents of low-quality exterior wall insulation being blown off by high winds occasionally occur

In addition, there are many reasons for the fall of the insulation layer, such as material quality, construction technology and construction management

Nippon has upgraded the insulation system, 4 major standards for the ability to withstand strong winds

In the face of frequent extreme weather, we need to improve the anti-falling defense of the building insulation system from four aspects

First of all, the design of the thermal insulation system should be reasonable.

Secondly, the choice of material types is also very important.

Finally, the construction process should be standardized, and each link in the process should be done strictly in accordance with the requirements of the specification, and the key nodes should be visualized and traceable

Integrated coating from bottom to surface, the external wall insulation system gives the foot insulation a sense of security

The technical route and standard system of the thin plaster exterior wall exterior insulation system have been tested by domestic and foreign projects for more than 30 years and more than 50 years abroad, and it has been proven to be a reliable, quality controllable, safe and reliable exterior wall insulation technology system

For example, the external thermal insulation system of thin plastered external walls should focus on the matching compatibility of thermal insulation boards, adhesives, plastering mortar, reinforced mesh cloth, and decorative coatings, and focus on the waterproof and anti-cracking treatment of the nodes

The use of an integrated coating scheme from heat preservation to finish can not only ensure the quality and compatibility of the products in the system, but also give better play to the maximum performance advantages of the system

Take Nippon Thin Plaster External Wall External Thermal Insulation System as an example.

Good durability, to ensure that the external wall insulation system can withstand severe weather tests during the entire life cycle of the insulation and decoration system, and maintain good safety and insulation performance

The external wall thermal insulation system needs to fully consider the impact of wall stress and deformation on the system.

There are changes in the sky, so we can prevent it by thinking about it