Operation method of plastic film thickness gauge in laboratory

In order to promote the better development of China's soft plastic film production enterprises, improve the quality of product packaging, increase the core competitiveness of film production enterprises, and reach the domestic level, so that China's products go to the world Jinan Sanquan Zhongshi Experimental Instrument Co., Ltd has developed and produced a special film thickness measuring instrument for high-performance laboratory, which is called the laboratory plastic film thickness measuring instrument chy-u The laboratory plastic film thickness gauge is equipped with a micro printer, which can display the data in real time, automatically count and print, and obtain the test results conveniently and quickly It is suitable for the thickness measurement of various hard and soft materials such as thin film, composite film, paper, foil, etc within the range of 2mm No matter from technology or cost, the thickness detection of plastic film is of great significance to manufacturers Technical parameters of laboratory plastic film thickness gauge: instrument model: chy-u production unit: Jinan Sanquan Zhongshi Experimental Instrument Co., Ltd measurement range: 0-2mm (other ranges can be customized) resolution: 0.1um measurement speed: 10 times / minute (adjustable) measurement pressure: 17.5 ± 1kPa (film); 100 ± 1kPa (paper) Contact area: 50mm2 (film), 200mm2 (paper) Note: choose one of the film and paper injection steps: 0-1300 mm (adjustable) injection speed: 0-120 mm / S (adjustable) boundary dimension: 450mm × 340mm × 390mm weight: 23kg how to measure the thickness of plastic film in the laboratory: 1 Select the presser foot according to the sample type For the sample with uneven pattern structure, the presser foot diameter shall be less than the pattern cycle length If necessary, the smaller presser foot can be selected to measure and report the thickness of the concave and convex parts 2 clean the presser foot and reference plate, and check the movement flexibility of the presser foot shaft Set the pressure, then drive the presser foot to press on the reference plate, and set the thickness gauge to zero 3 lift the presser foot and place the specimen on the reference plate without tension and deformation 4 place the presser foot on the sample gently and keep the pressure constant Read the thickness indication value after the specified time 5 repeat 3-4 procedures until the specified number of parts or each sample is measured 6 if it is necessary to measure the thickness under different pressures (such as geotextile, etc.), two to five procedures can be repeated for each pressure; or two to four procedures can be repeated for each measuring part or each sample from the beginning of low pressure to measure the thickness of each pressure at the same point, then replace the testing part or sample, repeat the operation of front carbon until the specified number of parts or each sample is measured Jinan Sanquan Zhongshi Experimental Instrument Co., Ltd has advanced testing technology, packaging testing equipment and professional laboratory It is committed to providing comprehensive and quality control solutions for industry customers Please call Sanquan Zhongshi for the laboratory plastic film thickness gauge!