Paint standard: GB/T 9756-2001 synthetic resin emulsion interior wall coating

Core tips: Synthetic resin emulsion interior wall coating GB/T 9756-2001 instead of GB/T 9756-1995 1 Scope This standard specifies the grading, requirements, test methods, inspection rules, marking, packaging and storage requirements of synthetic resin emulsion interior wall coatings This standard is applicable to the interior wall coating made of synthetic resin emulsion, with pigment, pigment and various auxiliaries, which can form a thin surface coating with a smooth surface after application 2 reference standards The provisions contained in the following standards are adopted in Paint agent, top 10 Chinese wall paint brands Recommended introduction: interior wall paint and exterior wall paint can achieve beautiful, clean and pleasant effects, but the effects in different environments are different, so the color of the paint will be different There are ten brands of Chinese paint, ten brands of global paint, ten brands of Chinese wall paint, and ten brands of Chinese paint, Famous trademark of Chinese paint and coating In private rooms, most of us choose according to our own personality, personal hobbies and living habits The younger generation will choose the interior wall paint with rich colors and bright colors, while the older ones will have some working experience Coatings home:: synthetic resin emulsion interior wall coating GB/T 9756-2001 instead of GB/T 9756-19951 range This standard specifies the grading, requirements, test methods, inspection rules, marking, packaging and storage requirements of synthetic resin emulsion interior wall coatings This standard is applicable to the interior wall coating made of synthetic resin emulsion, with pigment, pigment and various auxiliaries, which can form a thin surface coating with a smooth surface after application 2 The provisions contained in the following standards of the cited standards are the provisions of this standard by reference in this standard At the time of publication, the editions indicated are all valid All standards will be revised, and parties using this standard shall explore the possibility of using the latest version of the following standards GB / T 1250-1989 method for expression and determination of limit values GB / T 1728-1979 (1989) method for determination of drying time of paint film and putty film GB / T 1728-1995 rating method for aging of paints and varnishes GB 3186-1982 (1989) sampling of paint products (NEQ ISO 1512:1974) GB / T 9265-1988 determination of alkali resistance of architectural coatings GB / T 9266-1988 Determination of washability of coatings GB / T 9270-1988 determination of contrast ratio of light paints (polyester film method) (EQV ISO 3906:1980) GB / T 9271-1988 standard test panel for paints and varnishes (EQV ISO 1514:1984) GB 9278-1988 temperature and humidity for condition adjustment and test of paint samples (EQV ISO 3270:1984) GB / T 9750-1998 general rules for packaging of paint products GB / T 13491-1992 GB / T 15608-1995 China color system Hg / T 2458-1993 general rules for inspection, transportation and storage of coating products JC / T 412-1991 asbestos cement flat products for construction are divided into three grades: superior, first-class and qualified 4 The product shall meet the technical requirements of Table 1 Table 1 technical requirements The project index is the first-class qualified product There is no hard block in the container After mixing, it is in a uniform state Two layers of barrier free low temperature stability, non deterioration and drying time (surface dry) / h ≤ 2 coating film Normal contrast rate of appearance (white and light color) ≥ 0.950.930.90 alkali resistance 24h no abnormal washability / time ≥ 1000500200 paint home is focused on the decoration knowledge and effect map of coatings, diatom mud, paint coating, coating process, news and coating of fire-resistant coating, diatom mud, paint coating, coating process, fire-resistant coating,