Popularization of solid state filling machine related knowledge

Solid state filling machine is suitable for filling all kinds of viscosity products from water agent to cream It is an ideal filling machine for daily chemical, pharmaceutical, food, pesticide and other industries This kind of equipment has a new horizontal design, which is light and convenient It can automatically draw materials For paste with large viscosity, hopper can be added Manual and automatic mutual switch function: when the machine is in the "automatic" state, the machine automatically fills continuously according to the set speed When the machine is in the "manual" state, the operator steps on the pedal to achieve filling If the machine is kept on, it will become the state of automatic continuous filling Drip proof filling system: when filling, the cylinder moves up and down to drive the bulkhead The use, maintenance and installation of the solid-state filling machine are as follows; 1 Because the filling machine is an automatic machine, the dimensions of the easy pull bottle, bottle pad and bottle cap are required to be unified 2 Before starting the machine, it is necessary to turn the machine with the handle to see if there is any abnormal rotation, and the machine can be started only after it is judged to be normal 3 When adjusting the machine, the tools shall be used properly It is strictly prohibited to use excessive tools or use excessive force to dismantle parts to avoid damaging the parts or affecting the performance of the machine 4 Every time the machine is adjusted, the loosened screws must be tightened Turn the machine with the handle to see if the action meets the requirements before starting 5 The machine must be kept clean It is strictly prohibited to have oil, liquid medicine or glass debris on the machine, so as to avoid damage to the machine Therefore, it is necessary to: (1) remove liquid medicine or glass debris in time during the production process of the machine (2) clean all parts of the machine surface once before shift handover, and add clean lubricating oil to each activity department (3) it shall be scrubbed once a week, especially the places that are not easy to be cleaned in normal use or blown with compressed air.