Precautions for ampoule filling machine

Ampoule filling machine is suitable for filling and sealing ampoule filling liquid in pharmaceutical and chemical industries The piston metering pump is used for quantitative filling In case of lack of bottle, the liquid filling can be stopped automatically The gas can be gas, liquefied natural gas and liquefied petroleum gas The ampoule filling machine is of double needle type, compact structure, stable and reliable operation, convenient adjustment and operation, and complete functions Precautions for ampoule filling machine: 1 Selection of ampoules: since the ampoule filling machine is an automatic machine, there are requirements for the diameter of ampoules to be large, small, long and short Please refer to the specification table in the user manual 2 Before starting the machine, you must first turn the machine with the handle to see if there is any abnormality in its rotation, and then you can start the machine only after it is judged to be normal But please note: before starting the machine, make sure to pull out the handle to make the handle separate from the machine Ensure safe operation 3 When adjusting the ampoule filling machine, the tools should be used properly It is strictly prohibited to use excessive tools or use excessive force to dismantle the parts, so as to avoid damaging the parts or affecting the performance of the machine 4 Every time the machine is adjusted, the loosened screws must be tightened Use the handle to turn the machine and check whether its action meets the requirements before starting the machine 5 The gas head should always judge whether it is good from the size of the fire head, because after a certain period of use, the small hole of the gas head is easy to be blocked by carbon deposit or the small hole is deformed, which will affect the fire power 6 The exhaust pipe shall be installed on the fire head of ampoule filling machine, which can remove heat and a small amount of dust in the gas, and at the same time keep the indoor temperature, humidity and cleanness, which is good for the product quality and the health of the staff 7 The ampoule filling machine must be kept clean It is strictly prohibited that the oil, liquid medicine or glass break on the ampoule filling machine may cause damage to the machine Therefore, it is necessary to: (1) in the production process of the ampoule filling machine, the liquid medicine or glass chips shall be removed in time (2) before the shift handover, each part of the ampoule filling machine shall be cleaned once, and each part shall be refueled once (3) it should be scrubbed once a week, especially at places that are not easy to clean in normal use, and can be blown with compressed air.