Precautions for the construction of water-based metallic paint system!

As people's aesthetic level and artistic requirements are getting higher and higher, metallic paint is becoming more and more popular

1 Selection of putty

When using water-based metallic paint system coating system, you should select the corresponding and high-strength putty coating online coatingol.

2 Attention to the construction environment

1.

2.

3 Treatment of the base surface

1.

2.

*Substrate should be fully dried before construction

3.

4 Key points of metal paint construction process

1.

2.

3.

5 Key points of overall construction

1.

2.
Pay attention when spraying (rolling) metallic paint.
You must spray the cross thinly for multiple times and form once.
It is best to choose a DC spray gun.
The flow rate should not be too large.
The paint output is uniform and natural, so that the spray range is uniform.
Joint and close the gun
.

3.
It is recommended to choose medium and short hair rollers for roller coating construction.
Wet-to-wet lap joints should be used to collect materials evenly.
After spraying (rolling), the color should be even and uniform, without the phenomenon of blooming through the bottom, and the paint film is full
.
When paint film defects such as chromatic aberration and peeling appear on the painted surface, the entire partition should be repaired
.

4.
Due to problems such as flatness and difficulty in construction, it is not recommended to make flat effects for all metallic paint effects
.

6 Material storage method

1.
The lid of the bucket should be tightly closed during or after construction to prevent skin formation and placed in a cool, non-freezing place
.
When the temperature is too high, try not to construct on the wall exposed to direct sunlight to avoid stubble marks due to rapid drying
.

2.
The tools after use should be washed with water and dried for later use
.
Do not pour the used paint back into the original packaging
.