Precautions for the use of medical heating and cooling systems

The pharmaceutical heating and cooling system uses the existing thermal energy infrastructure to integrate into a single-fluid system or a secondary loop used to control the temperature of the process equipment.
This completes the flow of only one heat transfer liquid into the jacket of the reaction vessel, which can be passed through The operation controls the reaction process temperature of the entire temperature control system
.

1.
The medical heating and cooling system can be used together with most experimental teaching equipment for students, such as rotary evaporator, uniform temperature distribution, and constant liquid development environment
.

2.
When installing the medicine heating and cooling system, it must be able to ensure that the outer packing box of Wuxi Guanya is intact
.

It is forbidden to store in the open air, avoid some direct sunlight or rain
.

3.
Do not store in corrosive or gaseous places
.

Avoid vibration and shock
.

Boxes can no longer be stacked together
.

During the loading and unloading process, it must not be removed
.

　　4.
Avoid vibration and collision when handling the medicine heating and cooling system, and place it carefully
.

When opening the box, care should be taken not to damage the equipment and items in the box
.

　　5.
After unpacking, the random data should be kept by a special person to check whether the equipment and items in the box are consistent with the packing list
.

Randomly damaged items and equipment must not be lost
.

　　6.
During the installation process, first check whether the components of the cooler are complete and defective, and reconfirm that the performance parameters on the nameplate of the full cooler meet the requirements
.

　　7.
The medicine heating and cooling system should be circulated gradually
.

In the long-term operation, the temperature of the kettle body is also a reasonable phenomenon, but it is worried that the temperature rises to the rated temperature will affect the reaction of the material
.

In this case, the cooling system installed in the reactor should be cooled in time under the action of manual adjustment
.

Another point to be reminded is that in the cooling process, we must pay attention to the gradual circulation to avoid temperature differences
.

　　In the process of using the medicine heating and cooling system, the user can obtain a closed and repeatable temperature control in a wide temperature range, which can achieve temperature control from -120 degrees to 200 degrees, with a large temperature range and higher precision
.