Precautions for the use of Shanghai Shenggang automatic capping machine

Many companies now use capping machines to cap bottles, but with the increase in the use time of such equipment, the problem of poor capping effect or mechanical failure will occur, which is often the reason for not paying attention to maintenance.
, the following are the things that should be paid attention to
.

First, when using the capping machine on a daily basis, you should pay attention to whether the operating environment meets the equipment.
Different capping devices often have their own instructions.
For example, the operating temperature needs to be controlled below forty degrees Celsius and minus five degrees above zero.
And the humidity should not be too high, otherwise it is easy to corrode the equipment or cause a short circuit, and the equipment should be used and stored in a ventilated and dry place
.

 Second, every time you start to operate the capping machine, you should do an overall inspection of the equipment, whether there is poor contact or whether the power supply voltage is stable, etc.
, and the operation content should be reasonably arranged during the operation.
The most important thing is to avoid short-term If the rotation direction is adjusted frequently, it is easy to damage the motor
.

When screwing the cap, the operation should be standardized.
For example, some equipments use too much force each time the cover is pressed, resulting in unstable capping over time.
Therefore, the operation must be standardized
.

Third, it should also be noted that the capping machine with the computer as the operating terminal starts from the computer operating system when it is turned off, and also looks at the computer operating system when it is turned on.
This is to prevent unfinished instructions in the computer.
It is executed automatically after the device is turned on, so make sure that the control system is shut down and turned on normally
.