-
Categories
-
Pharmaceutical Intermediates
-
Active Pharmaceutical Ingredients
-
Food Additives
- Industrial Coatings
- Agrochemicals
- Dyes and Pigments
- Surfactant
- Flavors and Fragrances
- Chemical Reagents
- Catalyst and Auxiliary
- Natural Products
- Inorganic Chemistry
-
Organic Chemistry
-
Biochemical Engineering
- Analytical Chemistry
- Cosmetic Ingredient
-
Pharmaceutical Intermediates
Promotion
ECHEMI Mall
Wholesale
Weekly Price
Exhibition
News
-
Trade Service
ZNCL magnetic stirring heating pot oil-water bath pot, using Teflon heating pot heating, embedded temperature sensor; using external heat (hidden) heater, can be used as water bath, oil bath; ZNCL-GS oil bath pot stirrer control The temperature adopts fuzzy PID control algorithm, dual-screen digital display, and one-key self-tuning function; the stirring adopts German PAPST brushless DC motor, which has stable performance, low noise, long life and no spark generation; the speed is digitally adjustable, and the operation panel adopts all Light touch button design, the shell is made of cast aluminum and sprayed with plastic, which is anti-corrosion and has good insulation performance
.
Precautions for ZNCL Intelligent Digital Display Magnetic Stirring Heating Pot: 1.
Do not use it dry
.
2.
In order to ensure safe use, please be sure to use the ground wire
.
3.
In order to prolong the use of the product, the motors of all magnetic stirrers are equipped with fans for heat dissipation.
Therefore, when doing heating experiments, especially high-temperature heating experiments, the instrument cannot be used for heating alone, and the motor must be adjusted to rotate or rotate at a medium speed.
state (or idling) to prevent motors and electrical appliances from being damaged by high temperature radiation
.
If the motor can not start to rotate, you should find the dealer to repair it in time, otherwise you will not be responsible for damage or loss caused by failure to operate as required
.
4.
When the high temperature heating is over, please turn off the heating first, wait for a few minutes for the remaining temperature to dissipate, and then turn off the stirring
.
5.
The temperature of the heating part is high, so be careful when working to avoid burns
.
6.
If there are wet hands, liquid spillage, or leakage of electricity that occurs when it is placed under high humidity conditions for a long time, it should be dried in time or naturally dried before use to avoid danger
.
7.
When not in use for a long time, please store it in a dry and non-corrosive place
.
8.
When the ambient humidity is relatively high, there may be induced electricity transmitted through the insulation layer to the casing.
Please be sure to ground the wire to avoid leakage and pay attention to ventilation
.
9.
Relative humidity: 35%-85% (no condensation)
.
.
Precautions for ZNCL Intelligent Digital Display Magnetic Stirring Heating Pot: 1.
Do not use it dry
.
2.
In order to ensure safe use, please be sure to use the ground wire
.
3.
In order to prolong the use of the product, the motors of all magnetic stirrers are equipped with fans for heat dissipation.
Therefore, when doing heating experiments, especially high-temperature heating experiments, the instrument cannot be used for heating alone, and the motor must be adjusted to rotate or rotate at a medium speed.
state (or idling) to prevent motors and electrical appliances from being damaged by high temperature radiation
.
If the motor can not start to rotate, you should find the dealer to repair it in time, otherwise you will not be responsible for damage or loss caused by failure to operate as required
.
4.
When the high temperature heating is over, please turn off the heating first, wait for a few minutes for the remaining temperature to dissipate, and then turn off the stirring
.
5.
The temperature of the heating part is high, so be careful when working to avoid burns
.
6.
If there are wet hands, liquid spillage, or leakage of electricity that occurs when it is placed under high humidity conditions for a long time, it should be dried in time or naturally dried before use to avoid danger
.
7.
When not in use for a long time, please store it in a dry and non-corrosive place
.
8.
When the ambient humidity is relatively high, there may be induced electricity transmitted through the insulation layer to the casing.
Please be sure to ground the wire to avoid leakage and pay attention to ventilation
.
9.
Relative humidity: 35%-85% (no condensation)
.
