Preparation before starting the pill making machine of traditional Chinese Medicine

The pill making machine of traditional Chinese medicine is mainly used in the pill making production of traditional Chinese medicine It can be matched with the grinder to make various kinds of powder into pills It is mainly used in the processing and production of concentrated pills, honey pills, water honey pills and granular food products, and can complete the coating, drying and polishing work It can continuously and automatically (or manually) process and shape the slice, strip and granule products required by the production of traditional Chinese medicine, health care and food industries The electric heating drying process is adopted to coat, sugar coat and dry the finished products, which is applicable to the processing and development of the trial production room of the pharmaceutical factory, the research unit of traditional Chinese medicine, the hospital, clinic, traditional Chinese medicine shop (room) and the tonic counter to add pills and pill like food on site Before opening the pill making machine of traditional Chinese medicine, we should do a good job of preparation These steps can not be despised, because the process before the operation of the pill making machine is not completed, in fact, it has a great harm to the machine It is needless to say that reducing the service life of the machine will lead to the failure or even damage of the pill making machine of traditional Chinese medicine Before opening the pill making machine of traditional Chinese medicine, we need to conduct a comprehensive investigation on the pill making machine First, we need to determine whether the surrounding electricity is safe, whether the circuits of plug and socket are normal, and not because of the circuit problems, there is leakage or short circuit After checking the * item, do not leak out the check oil level, that is to say, the oil level on the gearbox should be in accordance with the standard of the traditional Chinese medicine pill making machine If it does not meet the requirements of the mark, it must be adjusted and improved Then you need to check whether the cooking oil on the hopper has been filled on the oil cup Are they all filled? Then do the parts of the internal machine meet the standards? Before starting, what content should we check for the pill making machine of traditional Chinese medicine? First of all, check whether the shot making machine has been aligned and tightened And whether the alcohol system has been adjusted clearly, appropriately and smoothly Zui is very important to use alcohol to disinfect the guiding frame and the introduction of pill making knife After finishing the above procedures, you can safely open the pill making machine of traditional Chinese medicine for use