Pressure test equipment in glass bottle containers - recommended

Pressure test equipment in glass bottle containers - recommended glass bottles and jars are packaging containers for food and beverages, medicines and many products, which are widely used, and glass is also a very historical packaging material
.

In the case of many kinds of packaging materials pouring into the market, glass containers still occupy an important position in beverage packaging, which is inseparable from
the packaging characteristics that it cannot replace with other packaging materials.

However, glass bottles and jars are easy to break, and the weight-to-capacity ratio is large
.

Especially in the application of gaseous beverages, beer, infusion bottle industry after withstanding high and low temperature changes and the internal pressure increase after filling, the probability of bottle breaking is higher
.

Therefore, it is necessary
for manufacturers to test the internal pressure resistance of glass bottles and cans.

We have seen that beer bottles and medicinal glass infusions have put forward clear requirements for internal pressure resistance test, we introduce the test method of internal pressure resistance test machine in GB/T 4546-2008 glass container internal pressure resistance test method and YBB00172003 internal pressure resistance test method
as an example.

The glass bottle resistance internal pressure testing machine produced by Jinan Sanquan Zhongshi Company can meet the two different test methods
of A\B.

Suitable for all kinds of beer bottles, wine bottles, beverage bottles, infusion bottles and other types of glass bottles withstand internal pressure test, fully automatic display of the pressure change of the entire experimental process, can quickly print the internal pressure test results, can meet the various capacity glass bottle pressure holding test and burst pressure test requirements
.

Technical parameters Measuring range 0~6 MPa Measurement error ±0.
5% Resolution 0.
01MPa Water addition method Automatic Linear rate pressurization 0.
4±0.
1MPa/s (or 0.
58±0.
1MPa) Test mode A pass, A increment, B pass, B destruction Machine size 580mm×430×1500mm (length, width and height) Weight 48Kg Working temperature 15°C-50°C Relative humidity 80%, non-condensing power supply 220V 50Hz Pressure test equipment in glass bottle containers - recommended