Preventive measures to avoid wear and corrosion of sand and gravel separator equipment

 Preventive measures for sand and gravel separator equipment to avoid wear and rust The main part of the sand and gravel separator that can play a major role in operation is its separation system.
Only by having a good separation system can ensure good separation during use.
effect, and it can be flexibly adjusted when using it
.

The surface of the sand and gravel separated by the equipment is relatively clean without a lot of sludge, and the ash content in the sand is relatively small, and because of the good separation effect, its water content is relatively small, and among them The water can be recycled and used, which can better make the sewage reach a single effect; and the wear resistance of the equipment itself is also very good and easy to operate
.

Among the separation equipment, the row hole type equipment that can achieve a better treatment effect at present, and it needs to be used in conjunction with a stone sweeper and a photoelectric control system.
The sand and gravel separator is mainly used to separate concrete, sand and gravel during operation.
The equipment can better deal with the problems caused by concrete pollution when it is used, and it will save more resources when it is used
.

And when using it, in addition to separating and cleaning the concrete, the sand, stone, water, etc.
after separation can be reused.
The remaining sewage is treated in a three-stage sedimentation tank.
, it will be deposited and the clean water will be re-entered into the cycle of the machine
.

The above is the separation system of the sand and gravel separator.
The separation effect of the equipment during operation depends to a greater extent on the separation system.
Therefore, it is also necessary to maintain the separation system during normal use.

.