Principle and application of anaerobic incubator

Anaerobic incubator is a special device for bacteria culture and operation in anaerobic environment It can cultivate anaerobic organisms that are difficult to grow and avoid the danger of death caused by exposure to oxygen during the operation of anaerobic organisms in the atmosphere Structure features: the product is composed of culture operation room, sampling room, gas path and circuit control system, wax sterilizer and other parts The temperature control system adopts high-precision digital display temperature controller, which can accurately and intuitively reflect the actual temperature in the box With effective temperature limiting protection device, it is safe and reliable The box is equipped with ultraviolet sterilization lamp, and the gas enters the box after filtering, which can effectively avoid bacterial pollution The bypass device can adjust the flow and input various gases at will The operation rooms are made of stainless steel plates The front window is made of transparent and stamping resistant special glass The special gloves are reliable, comfortable, flexible and easy to use The operating room is equipped with a special inoculating rod sterilizer, a wax melting disinfection device and a deaeration catalyst Operation method: the operator extends his hand into the operation room and closes the closed doors of the operation room and the sampling room Open the closed door of the sampling room, put the culture dish into the sampling room, and close the closed door of the sampling room Put the culture dish into the incubator in the operation room, and the closed door between the operation room and the sampling room is open Adjust the temperature to make the incubator temperature in the operation room reach the required temperature Fill nitrogen and mixture more than three times each Prosecution operating system Note: it is forbidden to open the hatch, glovemouth gland or disassemble for maintenance under vacuum The built-in power supply is 220V, 50Hz and 1kW The gloves shall be vacuumized before or at the same time as the box, and then stop vacuumizing at or at the same time as the box The pipe fittings of external air source shall be suitable, and the connectors shall be sealed firmly When inflating, it shall not exceed zero pressure, i.e 1 atmospheric pressure.