Putty dry enough to brush the paint? What issues should I pay special attention to when I paint my home?

Renovation of the new home to the second half, walls and on-site production of furniture paint quality, for the whole house finally presented a great impact on the effect. I heard that decoration paint this process, in fact, there are a lot of attention, such as wall paint how many times? How many times do wood paints go on? Is the paint good with a hand brush or sprayed with a machine? At home paint this key process to pay special attention to which problems, remember these principles, but also facilitate the owner supervision, acceptance quality.
putty dry also clean and then brush paint, wall paint brush too many times easy peel cracking
paint, paint can be said to be related to the face of home decoration . Be sure to pay attention to the putty of the wall before painting it. Generally speaking, the putty on the wall in the home decoration should be done twice, the first time to level the whole wall, the second time is to carry out local treatment and repair.
when we were supervising, we would find that the putty on the wall had arched, so why? The most likely reason is that the first putty did not completely dry the worker scraped the second putty, the result of the first putty in the drying process of the second putty arched up. So want the wall to be durable, putty is very important, must be dried out before construction.
putty dry, many workers paint the wall directly, which is actually a missing process. Be sure to stress to the workers, before painting the walls and ceilings, to clean up the walls of dust, excess putty, to deal with the cracks that appear, walls and ceilings and wood products at the junction to do a protection, to avoid wood products are painted.
paint is relatively simple. If the bottom color of the wall is relatively light, small flowers and the paint brush of the wall twice on it, if the background color is darker, and the paint color ready to brush is lighter, it should be based on the degree of cover of the paint color brush several times. But this is not to say that the more the number of paint brushes, the better, if the paint brush number too many times, but there will be skin, cracking phenomenon, so the general brush twice is the most appropriate.
some construction teams paint by hand, for skilled workers, this brush method is more uniform, but encountered poorly skilled workers, but also prone to brushing the wall to leave a mark. In order to improve the quality of the project, many construction sites have recently begun to use the painting process for construction. The quality of this practice is indeed easier than manual operation, but the disadvantage is that the material is wasted.
addition to the wall, the home such as bookcases, wardrobes, bath cabinets, TELEVISION cabinets, such wood products also have paint problems. For woodworking, carpentry in the production process, whether using ordinary nails or the use of gas nails, will leave nails on the surface of the wood, paint workers a very important job is to repair nail eyes. Good painters will be nail eye repair within a certain distance is difficult to see, poor sense of responsibility painters repair nail eyes, in close proximity will also see clearly, which not only affects the visual effects of wood products, but also affect the life of wood products. So the owner needs to emphasize the process to the workers before painting the woodwork.
paint film used in wood products is relatively thin, so paint at least 6 times more. And every layer of paint, have to wait for this layer to dry out, and then clean up the surface of the dust and then up and down. Also special emphasis is that wood products on the paint, has been installed hardware pieces such as door locks, pages, etc. , do not want to protect, if also painted, the surface of hardware pieces will be easily corroded, it is best to paint on the part of the paint paste some single-sided tape, hardware to protect.