Reactor refrigeration and heating integrated temperature control system needs to pay attention to safety matters

Reactor refrigeration and heating integrated temperature control system supporting the use of the reactor, due to the use of too much different reaction catalysts or other reasons will lead to dangerous reactions, therefore, the operator needs to pay attention to safety when using, understand these safety precautions, and ensure the operation of the reactor refrigeration and heating integrated temperature control system
.

1.
When not in use, it is necessary to clean the inside of the reactor refrigeration and heating integrated temperature control system to ensure the clean state
of the equipment.

2.
Before cleaning, disconnect the power connection first to avoid the humidity
of the reactor refrigeration heating and temperature control system.

3.
When cleaning the entrance part of the integrated temperature control system for refrigeration and heating of the reactor, use water with low surface tension (for example: soapy water).

When cleaning the outside of the instrument, use a damp cloth and water
with low surface tension.

4, the instrument should be kept vertically upward, the placement position of the equipment should be horizontal, and the ventilation surface should have enough flowing air, so that the high-temperature gas discharged can be quickly dissipated and the cooling efficiency
can be improved.

5.
The connection between the import and export and other equipment ensures that the connection is firm, and there is no shielding material within the specified range around the
equipment.

6.
There can be no flammable and explosive objects around the safe position of the equipment, and it is installed on the surface of the insulated object to ensure the safety of
the equipment when running at high temperature.

7.
Keep the surrounding environment of the instrument clean and hygienic, clean the inside of the equipment regularly, and avoid too much dust and affect the efficiency
of the equipment.

8.
Place the material that can absorb the thermal conductive medium at the bottom of the reactor refrigeration and heating integrated temperature control system to prevent the leakage or omission of the thermal conductive medium, and if there is a leak, clean it
up in time.

9.
When installing the reactor refrigeration and heating integrated temperature control system, it is necessary to consider whether the ground strength of the installation location can withstand the operation
of the equipment.