Reasons and solutions for water leakage in high and low temperature test chambers

Recently, some customers have asked for help, saying that the machinery and equipment they bought have abnormal problems, such as the environmental test box: water shortage alarm, overpressure alarm, load alarm and other problems, then why the high temperature test box has been leaking water? Liuqin Technology tells you how the high temperature test box can seep water? How to deal with it? I think there are many reasons for water seepage in the environmental test box, so this reason is not a common failure of the environmental test box to damage the machinery and equipment.
It can be solved by manual practical operations such as calibration.
Therefore, when this situation occurs, the actual situation There is no need to worry too much about the operation, the solution is simple and the speed is fast, so there is no need to worry about jeopardizing the experiment
.

Let's take a look at the actual reason and actual operation together with Liu Qin Technology
.

What is the reason why the high temperature test chamber has been leaking water? First, there will be water leakage caused by the poor airtightness of the water storage tank; it will also be that the water pipe is not properly connected and the water pipe is cracked; then we will first check the source of water seepage, such as: observe the water storage tank and air humidifier successively.
, Water level box
.

Then we will deal with the problem that the environmental humidity cannot be lowered.
Usually, the environmental humidity cannot be lowered due to the following reasons: 1.
The problem of the refrigeration compressor.
If the refrigeration compressor is not cooled, the environmental humidity cannot be lowered naturally
.

2.
The intermediate relay that controls the ambient humidity has thermally broken down
.

3.
There are 2 controllers at the vents in the experimental box.
The environmental humidity sensing technology hanging on the bottom is made of wet water, which causes the environmental humidity to display a high information, and the display information is 100
.

If it is caused by several points on the left and right, it is very simple, and it can be cleared and dealt with one by one according to its common faults
.

If the dry bulb temperature tube of the high temperature test box that users are very worried about has water droplets, the solution is relatively complicated, such as interprofessionals, which cannot be disassembled and assembled casually.
You can call or come to Liuqin Technology or the original manufacturer.
Business teaches you to handle it
.