-
Categories
-
Pharmaceutical Intermediates
-
Active Pharmaceutical Ingredients
-
Food Additives
- Industrial Coatings
- Agrochemicals
- Dyes and Pigments
- Surfactant
- Flavors and Fragrances
- Chemical Reagents
- Catalyst and Auxiliary
- Natural Products
- Inorganic Chemistry
-
Organic Chemistry
-
Biochemical Engineering
- Analytical Chemistry
- Cosmetic Ingredient
-
Pharmaceutical Intermediates
Promotion
ECHEMI Mall
Wholesale
Weekly Price
Exhibition
News
-
Trade Service
There are hollow discs densely arranged on the hollow shaft of the secondary zinc oxide hollow paddle dryer KJG-150, and the heat medium flows through the disc through the hollow shaft
.
The heat transfer area per unit of effective volume is large.
The heat medium (saturated steam) flows through the rotary joint, through the shell jacket and the hollow stirring shaft.
The hollow stirring shaft has different internal structures according to the type of heat medium to ensure heat transfer.
effect
.
When the paddle disc and the jacket are heated by steam, the upper part of the discharge port is also fed with heated dry air for further drying, which greatly increases the drying strength of the equipment
.
The evaporated water is brought out of the dryer by the exhaust gas, filtered by a dust collector, and the dried fine powder is recovered, and the moist air is discharged outdoors by the induced draft fan
.
Material parameters: Material: Zinc oxide Primary moisture: 20% Finished product moisture: 10% Processing capacity: 7500Kg/h Drying method: hollow paddle drying Heat source: saturated steam (0.
5-0.
6Mpa) Installation: Indoor power supply: 380V 50Hz three-phase four lines
.
The heat transfer area per unit of effective volume is large.
The heat medium (saturated steam) flows through the rotary joint, through the shell jacket and the hollow stirring shaft.
The hollow stirring shaft has different internal structures according to the type of heat medium to ensure heat transfer.
effect
.
When the paddle disc and the jacket are heated by steam, the upper part of the discharge port is also fed with heated dry air for further drying, which greatly increases the drying strength of the equipment
.
The evaporated water is brought out of the dryer by the exhaust gas, filtered by a dust collector, and the dried fine powder is recovered, and the moist air is discharged outdoors by the induced draft fan
.
Material parameters: Material: Zinc oxide Primary moisture: 20% Finished product moisture: 10% Processing capacity: 7500Kg/h Drying method: hollow paddle drying Heat source: saturated steam (0.
5-0.
6Mpa) Installation: Indoor power supply: 380V 50Hz three-phase four lines