Secret Disclosure - How can water-powered paint be used "to save money and be efficient"?

With the wave of national environmental protection, water-based paint was pushed to the forefront of the furniture coating market. But the new type of water-like paint is still in the development stage.
Compared to oily coatings, although the environmental protection is better, but there is still a gap in performance, especially in fullness, water resistance, chemical resistance, hardness, scratch resistance and other properties, water-based paint is still difficult to break through
China
.
1.5 parts of water-based wood paint was born
For the above difficulties, Carberry furniture paint "Natural House" water-based paint not only in a single and two-part water-based paint continuous optimization and iteration, but also created a new water-based paint system: Carberry "Natural House" 1.5 parts of water-based wood paint.
1.5 parts of water-like paint after the addition of crosslinker MWH001 (if not added crosslinking agent, can be used as a single part), and then with water deployment can be carried out construction.the addition of
crosslinker, so that 1.5 sets of water-like paint than a single-group water-like paint dry faster, with two-part water-resistant paint hardness, scratch resistance and chemical resistance, but there is no two-part re-life problem, construction is easier.
, the natural home 1.5 sets of water-reperced paint, has been nearly a hundred "oil-to-water" furniture factory large-scale use and has been unanimously praised.
, two representative finishes are particularly good performance, respectively: water-based matte varnish MW310 and water-resistant anti-scratch matte varnish MW330.
, how much better do they perform than watery plain finishes? We played the "3 rounds" of the competition to decide the highs and lows!
in order to test the effect of crosslinker MWH001, there are four products in this evaluation:
ROUND1
Adhesion
adhesion is an important indicator of the "tightness" of water-based paint and substrate, and also a key indicator for furniture to verify whether "water-based paint will fall" during long-term use.
In the test of the 100-g knife, the water-based ordinary paint adhesion is 1 level, MW310 x and MW330 x (plus/ no crosslinking agent) have shown excellent adhesion, and reached the highest level of national standard "0 level".
ROUND2
Transparency
➤ Wet film transparency
wet film whitening is a common phenomenon of water-like paint, generally dry will not be white, but the transparency of dry film will also have a certain impact, and even affect the construction staff's judgment of dry film transparency.
water-like ordinary paint spray, in the wet film to dry the first 30 minutes is milky white, poor transparency, completely dry after the paint film will return to transparent, not white.
the wet film transparency
and the wet film (plus/without crosslinking agent) of MW330 and MW310 is not white after drying or drying.
➤ Dry film transparency
can be tested by scraping glass
from the image above can be clearly seen, water-based ordinary paint film, like a glass cover with a fog-like film, can not see through the text under the glass, and MW330 x paint film is like a glass with a completely transparent film, can clearly and clearly display the text below the glass.
ROUND3
water and alkali resistant
according to the national standard of water-based wood coating "GBT_23999-2009 - interior decoration water-resistant wood coating" standard test.
"water-resistant, alkali-resistant" reflected in the whitening of the paint film, the whiter the paint film, water-resistant, alkaline-resistant.
➤ water resistance
24h water resistance test results, paint film whitening from good to poor sort: MW330 x crosslinker ☞ MW310 x crosslinker ☞ MW310 x non-crosslinking agent ☞ MW330 x non-crosslinking agent ☞ water-based ordinary surface. of which, 24h after taking off the filter paper, absorbing dry water:
>5 minutes later, MW330 x cross-linking agent paint film is completely white, normal as before, the white phenomenon disappeared the fastest;
≥ 30 minutes later, the other 4 products were shown as follows: MW310 plus cross-linking agent is not white;
➤
alkaline
24h alkaline test results: 5 products are successfully cleared, paint film performance is normal, no whitening and other anomalies.
From the evaluation of 3 rounds, it can be seen that the performance of MW330 and MW310 x (plus or without cross-linking agents) is better than that of water-based ordinary finishes, while the performance of "adding crosslinkers" is also better than that of "not cross-linking agents". Although only 1% of crosslinkers are added, the effect of transparency, water and alkali resistance is immediate.
addition, the MW310 and MW330 x in the following important indicators, performance also has excellent performance:
➤ hardness
MW310 x and MW330 x hardness are up to HB, than the national standard of B-class, a higher level, almost comparable to the hardness of two sets of finish.
➤responsive scratch
anti-scratch test, the MW310 x paint film scratches are relatively obvious, the circle is whiter, while the MW330 x has a slight scratch, the circle is slightly white, it can be seen that the MW330 x has better scratch resistance.
➤ is full of
The MW310 and MW330 are containing more than 32%, which is equivalent to water-based plain finish. They can be polished with 400, 600, sandpaper primers, with 800, 1000 sandpaper for color polishing, so that the paint film more delicate, more meaty, more abundant.
MW310 and MW330 are suitable for the closed and open effect of shallow catheter substrates, while medium and deep catheter substrates are suitable for opening effects. The applicable sub-areas are broad: high-end solid wood furniture, suite furniture, cabinets, office, children's furniture and so on.