Several factors affecting the accuracy of capsule tablet counting machine

Capsule granulator is widely used in medicine, food, chemical industry and other industries The equipment adopts a unique number of plates, which not only can automatically count and fill tablets and pills, but also can automatically count and bottle abnormal tablets and capsules The product is in full compliance with GMP specifications This machine is the third generation of the tablet machine The vibrating head adopts the flexible structure of eccentric screen movement and ultra quiet, which can adjust the frequency of eccentric screen movement steplessly The main engine is driven by variable frequency motor, which is flexible to start and has a wide range of speed regulation Here is a brief introduction of the factors that can affect the accuracy of capsule counting machine, as follows: the quality of ambient compressed air will affect the accuracy of counting Compressed air with large water content has a great influence on the sensitivity of actuator cylinder Once the sensitivity of cylinder decreases, the accuracy of counting cannot be guaranteed Material factor: the setting oscillation frequency of the three-stage oscillation plate for the production of capsules, tablets and pills is totally different Or because of the more dust brought by the materials in the production of tablets and capsules, the accumulation of dust in the detection channel blocks the infrared ray, so that the counting circuit can not work normally Parameter setting: the setting size of the silo gate, the setting of the oscillation frequency of the three-stage oscillating plate, the setting of the product length and small parameters, the setting of the expected number, the setting of the counting speed and the setting of the separation speed will affect the accuracy of the capsule granulator As the actuator of capsule counting machine, the speed of reaction directly affects the accuracy of counting The main reasons for the decrease of cylinder sensitivity are: moisture content in the compressed air, non cylinder specific grease, impurities entering the cylinder, wear and air leakage of the cylinder seal, etc Human factors: the operator did not preheat the machine before starting the machine according to the requirements of the operating procedures Or during the operation of the machine, the operator fails to replenish the materials in the bin in time, which affects the separation state of the materials on the oscillating plate, resulting in inaccurate product count.