Simple and easy way to deal with the failure of clamp check valve

The simple and easy way to deal with the failure of the clamp check valve is to close the check valve, which is to stop the flow direction of the fluid and reduce the backflow when the fluid stops There is a kind of check valve called wafer check valve Its structure is very simple, and it is also very convenient for maintenance It is more convenient for users to install it It is not limited by its position, and has strong sealing function When users use it, they will find the failure of the clamp check valve What should users do? The failure of the check valve caused by the wrong installation may be caused by the incorrect installation method and the use environment can not meet the use of the check valve, resulting in the failure of the pump body When installing the wafer check valve, the user needs to pay attention to various installation methods, and the installation of its outlet side pipe needs to be slightly higher, so as to facilitate the whole closure and prevent the occurrence of backflow Impurities appear The fluid conveyed by the clamp check valve contains large impurities, which will affect its function If there is a large amount of impurities in the clamp check valve, a filter can be installed in the pipeline to prevent impurities from passing through the valve, which will cause the valve to fail and can not meet the requirements of environmental work for the check valve In addition to these two cases, only the damage of the valve will lead to the failure of the valve Users can adjust the valve according to their actual situation.