-
Categories
-
Pharmaceutical Intermediates
-
Active Pharmaceutical Ingredients
-
Food Additives
- Industrial Coatings
- Agrochemicals
- Dyes and Pigments
- Surfactant
- Flavors and Fragrances
- Chemical Reagents
- Catalyst and Auxiliary
- Natural Products
- Inorganic Chemistry
-
Organic Chemistry
-
Biochemical Engineering
- Analytical Chemistry
- Cosmetic Ingredient
-
Pharmaceutical Intermediates
Promotion
ECHEMI Mall
Wholesale
Weekly Price
Exhibition
News
-
Trade Service
"China Paint Online News Information"
paint construction is not random application on the line, paint has a strong technical recommendations please professional master, paint construction of the six points of caution can not only help their own construction can also help you to carry out supervision.
I. The correct construction procedure is →substrate cleaning, handling→ batch of soil →painting with sandpaper→ painting primer (protecting wall structure) →coloring finish (painting beautifying the wall)", if it can be done, it can be relatively emenated.
, latex paint if opened after the can to be directly painted, may be too thick, it is recommended that according to the proportion of water added to the product packaging, add water dilution, paint will be easier to paint. Latex paint brushing interval time, should be subject to specific construction conditions, theoretically is the first time the paint is completely dry and then applied a second time, generally about 2 hours apart.
3, in order to prevent the appearance of brush marks, can be appropriate in latex paint paint to add a small amount of water, adjust the paint viscosity, one-time brush area should not be too large, the choice of brush to be suitable, not too soft or too hard, in the absorption of strong bottom brush on a primer, can make brush marks less obvious.
, the use of roller construction is quite labor-saving, just moisten the drum, and then evenly stain the paint, in a straight way brush can be. It is suggested that each roll coating, should overlap with the upper roll coating about 1/3 of the area, if one, that can eliminate the roller junction to form a clear trace; Rolling should not be too fast, to avoid paint splashes, or uneven coating.
5, it is generally not recommended to brush the paint directly on the wallpaper, if you want to repaint, it is best to use diluted detergent or hot water to help soften the glue paste wallpaper, after scraping the wallpaper and residual glue, and then brush. If not on the wallpaper paint, should also be in a small area of the first test brush, to see if there is a peeling bubble flow hanging and other phenomena, if not the above phenomenon, can be painted the whole surface.
6, if the old house wants to repaint, should first observe whether the old paint film is intact, if no peeling, peeling, powdering, cracking and other phenomena occur, then the coating surface clean, dry, you can directly coat the construction. If the old coating if there is peeling, peeling, powdering and so on, then you need to scrape... Remove, sandpaper polished, until a solid foundation surface is exposed before recothing can be carried out.
。