Six tips for wood lacquer construction

China Paint Online News Information: the correct coating construction methods to allow paint to play professional performance, as far as wood paint is concerned, want to get good results must pay attention to the construction method, small editor here to introduce the wood paint construction of the six tips.
wood paint construction know-how one: dusting in advance. First of all, the wood surface polished flat, treatment of floating ash, cleaning can be used with a special dust cloth, large areas (such as ground version) with vacuum cleaner repeated vacuum.
wood paint construction know-how two: varies from material to material. Understand the wood of wood, if it is hard wood (such as teak, birch, Bengalis) should be careful to use putty, foam water, etc. to beat the bottom so as not to cause color change and affect adhesion. Hard wood, want to get the best results, directly brush paint, if you need to fill the gap, it is recommended to use paint and fine wood powder stirring evenly to fill; If the general wood, such as the need to use transparent putty to do substrate treatment, then first with a scraper evenly scraped the entire base, should be thin should not be thick, drying should be uniform and thoroughly polished off the surface attached to the wood excess transparent putty, so as not to cause paint disease.
three tips for wood lacquer construction: paint preparation. When painting, the environment and brush tools must be clean, operators should wear clean work clothes, wear clean work caps.
wood paint construction know-how four: coating grasp. Brushing paint should be thin not thick, can be thin layer multi-channel; When doing multi-layer coating construction, each brush should be left to the lower layer after drying out the construction, and every time to polish.
wood paint construction tips five: temperature-appropriate construction. When the temperature drops below 5 degrees C, the drying time of the paint is prolonged, and the low temperature will produce white fog or de-lighting, so construction should be avoided in this case; Avoid direct sunlight or high temperature operation, the temperature is too high paint dry faster, will also produce pinholes or bubbles, so should also try to avoid high temperature construction.
wood paint construction tips six: humidity grasp. Environmental humidity greater than 85% should not be suitable for construction, otherwise it is easy to produce paint film whitening and other ills.