Slope rise and cool high and low temperature all-in-one machine maintenance procedures

To slope rise and cool high and low temperature all-in-one machine as the center of cleaning dust, garbage and so on.
to clean up the change inspection, inspection can find problems, find slope rise and cool high and low temperature all-in-one machine potential defects, and timely treatment.
to maintain and improve the results of the initial clean-up phase, it is necessary to eliminate dust, pollution and other root causes (sources of occurrence), for this reason can be taken to eliminate or cover, seal and other countermeasures.
to the difficult to maintain the parts, such as refueling, cleaning, de-fouling, etc. , should also take effective countermeasures to improve the slope rise and cool high and low temperature all-in-one machine maintenance.
to establish standards for cleaning, lubrication, inspection and maintenance, and who should be identified in the standards? When is it? Do what? Where? How do you do that?Give full play to the inherent function of slope rise and cool high and low temperature all-in-one machine, to learn slope rise and cool high and low temperature all-in-one machine structure, function and judgment benchmark, check the slope rise and cool high and low temperature all-in-one machine the appearance of the main parts, find the slope rise and cool high and low temperature all-in-one machine defects and restore it, while making themselves master the necessary inspection skills.
be perfected in accordance with the standards set in the third and fourth steps, fully in accordance with the implementation, which is the independent inspection benchmark.
the slope rise and cool high and low temperature all-in-one machine as the activity to the peripheral slope rise and cool the high and low temperature all-in-one machine, the whole workshop to expand the range of activities.
is for the workshop fixtures, semi-finished products, non-performing goods, etc. , and work out management benchmarks, reduce things, things and other management objects, as far as possible simplified.
is to comply with (maintain) the benchmarks and refine them gradually so that the operators can easily comply.
to establish a continuous improvement of consciousness, and constantly carry out PDCA cycle, slope rise and cool high and low temperature all-in-one machine for continuous improvement, to achieve independent management.
oil circulation temperature control machine daily maintenance 1. In the normal use of normal process, regular use of dry compressed air to clean the machine internal pump wind leaf cover on the metal residue and dust, to prevent the wind leaf cover blockage, the motor cooling is not good, resulting in pump motor noise or stuck; 2. In the case of machine power failure, regular use of dry compressed air to clean the machine box inside and cooling fan dust, to avoid metal residue on electrical components caused by electrical failure; 3. In the case of machine shutdown, regularly clean the machine return filter, to avoid the filter blockage caused by the machine overheat alarm and other faults;4. During the long-term use of the machine, in accordance with the other requirements of the instruction manual regular maintenance or replacement of other machine components;