-
Categories
-
Pharmaceutical Intermediates
-
Active Pharmaceutical Ingredients
-
Food Additives
- Industrial Coatings
- Agrochemicals
- Dyes and Pigments
- Surfactant
- Flavors and Fragrances
- Chemical Reagents
- Catalyst and Auxiliary
- Natural Products
- Inorganic Chemistry
-
Organic Chemistry
-
Biochemical Engineering
- Analytical Chemistry
- Cosmetic Ingredient
-
Pharmaceutical Intermediates
Promotion
ECHEMI Mall
Wholesale
Weekly Price
Exhibition
News
-
Trade Service
The evaporation of water in water paint is mainly controlled by adjusting the temperature and humidity of the paint room, so the control of temperature is more strict, otherwise it is easy to have quality problems such as hanging and bubbles, so the standard management of water paint construction is particularly important. Here, the small editor lists several standardized water-specific primer use methods, including:
(1) storage, mother stored in a temperature-adjustable insulation cabinet, maintained at 5 to 35 degrees C, unosted water-like color mother can be stored for 4 years, after deployment can be stored for 12 months; Before the water paint master color palette, there is no need to use a blender, just gently shake the color master can be color palette, easy to use, and can be stored again using
.
(2) construction environment control, relative humidity is less than 70%, the temperature of 25 degrees C.
(3) all the way, except for the barge area and the transition with a small amount of water mill.
(4) deployment requirements, water paint spray gun, load utensils, mixing ruler should not be shared with solvent-based paint;
(5) two methods to clean the oil removal, before spraying must first clean the surface of the workware with a water-like cleaner, and then use an oil-like de-oil remover to remove oil.
(6) cleaning gun method, can use tap water, otherwise it will corrode the body of the gun and cause paint defects and other drawbacks.
(7) Safety protection method, water paint gun machine must be separated from solvent paint cleaning, do not mix, water paint gun machine waste bin filled with 25 to 30 L after adding water-based flocculant, can make water-based cleaning agent recycling, grinding must wear prescribed protective equipment, spray must wear activated carbon mask or air supply mask, anti-solvent gloves, anti-static work clothes and other prescribed protective equipment.