Steps required for normal operation of filter

The water to be treated by the filter enters the body from the water inlet, and the impurities in the water are deposited on the stainless steel filter net, resulting in the pressure difference The pressure difference switch is used to monitor the change of the pressure difference at the inlet and outlet When the pressure difference reaches the set value, the electric controller sends signals to the hydraulic control valve and the drive motor, which causes the following actions: the motor drives the brush to rotate, cleans the filter element, and the control valve is opened for blowdown The whole cleaning process only lasts for tens of seconds When the cleaning is finished, the control valve is closed, and the motor stops rotating, The system returns to its initial state and starts the next filtering operation Filter After installation, the technical personnel shall conduct debugging, set the filtering time and cleaning conversion time The water to be treated enters the body from the water inlet, and the filter starts to work normally When the preset cleaning time is reached, the electric controller sends signals to the hydraulic control valve and the drive motor, causing the following actions: the motor drives the brush to rotate, cleans the filter element, and the control valve opens to drain , the whole cleaning process only lasts for tens of seconds When the cleaning is finished, close the control valve, stop the motor, restore the system to its initial state, and start the next filtering process Among them, Zui is important for the removal of separator plate, i.e the development of non separator filter The non partition filter not only eliminates the danger of the partition plate damaging the filter medium, but also effectively increases the filtering area, improves the filtering efficiency, and reduces the air flow resistance, thus reducing the energy consumption In addition, the air filter has made great progress in high temperature resistance, corrosion resistance, water resistance, bacteria prevention and other aspects, meeting some special needs The inside of the filter shell is mainly composed of coarse filter screen, fine filter screen, suction pipe, stainless steel brush or stainless steel suction nozzle, sealing ring, anti-corrosion coating, rotating shaft, etc.