Tens of millions of kinds of waterproof paint, different building parts with which?

Different parts of the building, waterproof material requirements are not the same. Each material has its own strengths and weaknesses, a material can not cover the world, where good materials are not used, all kinds of materials can only complement each other, not replace, each useful place.
roof waterproof and basement waterproof, the requirements of different materials, and the bathroom waterproof and wall waterproof more different, slope roof, complex roofing is not the same, material selection should be carefully .
House waterproof layer
roof waterproof layer exposed to nature, by the hot sun exposure, wind blowing, rain and snow erosion, cold and heat temperature torture, day and night temperature difference changes repeatedly, no good material and good protection measures, difficult to achieve the required durability.
, we should choose waterproof materials with high pull strength, large elongation and good anti-aging. Such as polyester tire high-polysuper modified asphalt coil, triethyl propylene rubber coil, P-type PVC coil (welded seam), single-component polyurethane coating (plus protective layer).
Wall waterproof
why the wall leakage, the reason is that the wall is now too thin, mostly light masonry, a large number of internal and external seams, and then doors and windows
wall waterproof can not use coils, can only use paint, and external decoration materials combined. Windowthe seam only sealing paste can solve the problem.
underground building waterproof
underground waterproof layer soaked in water or very humid soil for many years, waterproof material must be water resistant. Can not use perishable tire system into the coil, the bottom plate waterproof layer applied thick, and has a certain resistance to the ability to sting waterproof material.
is best stacked 6mm to 8mm thick. If synthetic polymer coils are selected, hot welding seams are most suitable. The use of adhesive seams, its adhesive should be water resistance is excellent, otherwise no good coil can not be selected. Use waterproof paint with caution. Separate use of thick main 2.5mm, and coil composite use thickness should also be 2mm thick.
bathroom waterproof
bathroom waterproof has three characteristics. First, not affected by the natural climate, the temperature change is not big, the extension rate of the material is not high;
according to the above three characteristics, can not choose the coil, only the paint is the most suitable, the coating and cement-based acrylate coating as the most suitable, can be firmly pasted on the tile.
overpass waterproof
construction of neutral overpass projects more and more, reinforced concrete beams must be waterproof, in order to extend the service life.
because of the waterproof layer on the high temperature asphalt concrete pavement, so the waterproof layer should withstand 110 degrees C of high temperature. Choose asphalt coating or APP modified asphalt coil.