Tensile testing machine system control maintenance

First, regularly check whether the connection line of the back panel of the controller is in good contact, and if it is loose, it should be tightened in time; Second, after the test, if there is a long period of time without the machine, turn off the controller and computer; Third, the interface on the controller is a one-to-one correspondence, and the wrong interface may cause damage to the equipment; Fourth, the interface on the plug-in controller must be powered off the
controller.

Fifth, according to the use of the machine and the use of the oil, regularly replace the suction filter and filter element, replace the hydraulic oil, regularly check whether there is oil leakage at the host and the oil source, if there is an oil leak, the sealing ring or combination pad
should be replaced in time.

Suitable for plastic films, composite films, adhesives, adhesive tapes, medical patches, protective films, release paper, rubber, artificial leather, paper fibers and other products, the instrument integrates drawing, peeling, tearing, heat sealing, fixed elongation stress, elastic modulus, Young's modulus, downward pressure, ring initial sticking and other professional independent test procedures, providing users with a variety of test items
.