Test method for adhesive strength of medical tape

The test method of medical adhesive tape is an important test index in medical adhesive tape, and the adhesive tester is a necessary test instrument in pharmaceutical factory Test method for adhesive holding of medical adhesive tape: wipe the test plate and loading plate with cleaning agent, and then dry them carefully with clean gauze, and wash them repeatedly for more than three times until the working surface of the plate is clean through visual inspection After cleaning, do not touch the working surface of the plate with hands or other objects Under the condition of 23 ℃± 2 ℃ and 65% ± 5% relative humidity, stick the specimen parallel to the longitudinal direction of the plate in the middle of the adjacent test plate and loading plate according to the specified size Roll the specimen with a press roll at a speed of about 300 mm / min Note that during rolling, only the force generated by the roller mass can be applied to the sample The rolling times can be specified according to the specific product conditions If there is no regulation, the rolling shall be repeated three times Then fix the test plate vertically on the test stand, and connect the loading plate and the weight lightly with the pin The whole test stand is placed in the test chamber which has been adjusted to the required test environment Record the test start time Label: adhesive tester, adhesive tape tester, adhesive adhesive adhesive tester, pressure-sensitive adhesive tape tester, medical label adhesive tester