The cause of overheating failure of industrial low temperature small chillers

What are the causes of overheating failure of industrial low temperature small chillers? According to the actual experience analysis of the use of cold water machine, if the operating state of excessive wear, there will inevitably be a higher operating temperature, or because of uneven conditions between bearings and shaft necks, resulting in high-speed operation process, due to friction and the increasing temperature of the situation, for such failures, need timely and effective treatment, to avoid the cold water machine in an overheated operating state, resulting in a more serious machine accident.
Many times, overheating, that is, the temperature is too high, often lead to cold water machine noise becomes higher, due to excessive wear and so on, the cold water machine overheating failure, often appear different degrees of noise problems, if the cold water machine appears all kinds of noise, at this time need professional personnel timely analysis of the specific causes of noise, because the cold water machine operating principle is relatively simple, so in a short period of time to judge the specific cause of the failure, so as to achieve a rapid solution to the problem, to improve the efficiency of the cold water machine.
, how can companies avoid overheating failures? In fact, overheating is not only refers to the room temperature is too high, exhaust, especially the exhaust temperature is too high, is also common.
Want to reduce the cold water machine temperature is too high the possibility of the situation, first of all, starting from the selection, choose the right chiller, followed by to install perfect, to comply with the specifications of the installation, followed by regular inspection, maintenance, maintenance, prohibition of ultra-conformity with the operation, to avoid the cold water machine temperature is too high.
Once overheated, chillers will appear refrigeration efficiency decline and other problems, enterprises want to cold water machine operation is stable, it is necessary to maintain regular maintenance, and after the discovery of problems to deal with in a timely manner, in order to avoid such problems.