The constant temperature and humidity test chamber should be stored to keep dry

When the machine is experimenting, where does the moisture come from? When the equipment was doing the high temperature experiment, the temperature of the box was very high
.

However, if the tailgate is opened at this time, then the strong cold air from the outside world will enter the box
.

Then the hot and cold alternately form water vapor
.

Water vapor solidifies into frost
.

The formation of frost can affect the machine and affect normal application.

Therefore, the key to maintaining dryness is to do a good job of dehumidification, and the machine and equipment itself should not be configured with dehumidification, so there is no need to worry
.

Don't worry about some bad effects of opening the tailgate, the design staff has already prepared in advance at the time of design.

However, in the whole process of application, do not open the tailgate, open the tailgate, will lead to heat loss, will be a burden
on the high and low temperature test chamber.