The ground cleaning method of hydration stone

For the ground polishing of erythra stone to use the water mill stone silica stone seal curing agent, water mill stone silica grinding stone ground is a traditional hydration stone ground modified products, surface finish is high, crystal surface effect can be comparable with natural marble, no special care, just water drag the ground can be. The hardness of the surface of silica millstone is close to the surface of high hardness granite, good wear resistance, anti-penetration, waterproof and anti-fouling, oil-resistant acid and alkali, long service life, maintenance cleaning and hygiene management are very convenient. Let's look at the ground cleaning method of hydration stone
the
.
the main component of cement is calcium silicate, and then a moderate amount of gypsum grinding fine, can be rinsed with hydrochloric acid and other strong acids, you can also go to the home market to buy some special cement cleaning agent, the effect is also very good;
a once-and-for-all approach is to make a sealing curing agent, the original cement surface can not only have the brightness of tiles but also dust and hardening effect. Can be called seamless floor tiles!
If the ground strength is not good enough, it is

necessary to resurface the cement concrete floor of quality in line with the design requirements;
02
If only a few millimeters of cement mortar or concrete strength is not enough, you can use a water grinder to remove the low-strength surface polishing, and then paint epoxy floor paint
03
water millet
if the grass is mixed soil ground and only a few millimeters of surface strength caused by sanding can be used to harden the ground sand treatment opposite layer.
04
washing machine can be used to clean the ground of the hydration grinding stone. The smoothness of the ground is not large, the water absorption of the washing machine is more difficult, used in the tile floor, epoxy ground method cleaning is bound to achieve the ideal cleaning effect. Therefore, the washing machine needs to use a brush instead of a cleaning pad, so that the ground can be cleaned. On the other hand, the washing machine in the cleaning of the ground of the hydration grinding stone is more difficult to absorb water, so when cleaning the water needs to be opened a little larger, in order to achieve the best cleaning effect.
05
cleaning of the ground is a method, such as a variety of soft ground (plastic floor, soft glue), hard ground (marble, granite, tiles, cement) for disinfection cleaning, removal of all stains on the ground, and then for vinegar polishing and other professional treatment, so that the dirty ground quickly restored to clean.
tools
be used to clean the land:
washing machine, nylon brush disc, water absorber, mop, bucket. Use agent: weak alkali or neutral cleaner.
operation method:
will diluted cleaning liquid into the washing machine, boot operation, from the back forward, walk in a straight line, so as to avoid omissions;
Precautions:
Cleaning the ground does not use acidic and powdery cleaners, otherwise it will damage and corrode the stone surface, avoid using rough material to rub the ground, so as to avoid permanent scratches on the stone surface;