-
Categories
-
Pharmaceutical Intermediates
-
Active Pharmaceutical Ingredients
-
Food Additives
- Industrial Coatings
- Agrochemicals
- Dyes and Pigments
- Surfactant
- Flavors and Fragrances
- Chemical Reagents
- Catalyst and Auxiliary
- Natural Products
- Inorganic Chemistry
-
Organic Chemistry
-
Biochemical Engineering
- Analytical Chemistry
- Cosmetic Ingredient
-
Pharmaceutical Intermediates
Promotion
ECHEMI Mall
Wholesale
Weekly Price
Exhibition
News
-
Trade Service
The inner diameter of the tower is 3600, and the inner diameter of the tower is 3600m.
The inner diameter of the tower is ≧3600m.
Centrifugal atomizer, rotating speed 12,000 rpm Atomizer frequency conversion speed regulation tower with four sets of vibrator rapping devices on the outer wall, with cold wall system cavity (main tower) internal pressure display and outlet air temperature display , The tower body made of stainless steel 304 for the discharge of the dedicated fan is erected by brackets, and there are protective railings and ladders on the upper part (including outriggers), all of which are made of stainless stee.
Secondary cyclone separation The secondary separator is cut off with a closed fan, so that the subsequent pneumatic conveying pipeline is made of stainless steel 304 to collect the main tower, the primary and secondary cyclones, and a total of three discharge port.
(22kw) frequency conversion control, the outlet of the vibration damping device is equipped with a foam dust collecto.
No pollution emission of exhaust ga.
Moisture evaporation: ≧80kg/h Dry material moisture content: ≤5% solids recovery rate>90% Air is filtered by high-efficiency junior high school, and the air with dust particles above 5 microns is filtere.
The air is heated by steam, and the electric heating compensates for the design temperature of the inlet air: 180-200 degrees, outlet air temperature 80-90 degrees, material temperature below 40 degrees
The inner diameter of the tower is ≧3600m.
Centrifugal atomizer, rotating speed 12,000 rpm Atomizer frequency conversion speed regulation tower with four sets of vibrator rapping devices on the outer wall, with cold wall system cavity (main tower) internal pressure display and outlet air temperature display , The tower body made of stainless steel 304 for the discharge of the dedicated fan is erected by brackets, and there are protective railings and ladders on the upper part (including outriggers), all of which are made of stainless stee.
Secondary cyclone separation The secondary separator is cut off with a closed fan, so that the subsequent pneumatic conveying pipeline is made of stainless steel 304 to collect the main tower, the primary and secondary cyclones, and a total of three discharge port.
(22kw) frequency conversion control, the outlet of the vibration damping device is equipped with a foam dust collecto.
No pollution emission of exhaust ga.
Moisture evaporation: ≧80kg/h Dry material moisture content: ≤5% solids recovery rate>90% Air is filtered by high-efficiency junior high school, and the air with dust particles above 5 microns is filtere.
The air is heated by steam, and the electric heating compensates for the design temperature of the inlet air: 180-200 degrees, outlet air temperature 80-90 degrees, material temperature below 40 degrees
