The Production Process of CALCIUM GLUCONATE MONOHYDRATE

The production process of Calcium Gluconate Monohydrate involves several steps, each of which is carefully designed to ensure the quality and purity of the final product.
The production process can be broken down into several stages, including preparation, mixing, neutralization, evaporation, and drying.

The preparation stage involves the mixing of calcium carbonate, glucose, and water.
The calcium carbonate is added to the water, and then glucose is added to the mixture.
The solution is then mixed thoroughly to ensure that all of the calcium carbonate is dissolved and that the glucose is evenly distributed throughout the solution.

The mixing stage involves the use of high-shear mixers, which help to ensure that the solution is homogeneous.
This is important because it ensures that the final product will be uniform in appearance and consistent in its composition.

In the neutralization stage, the solution is treated with an acid, such as sulfuric acid, to neutralize any remaining lime or carbonate ions.
This step is important because it helps to improve the solubility of the calcium gluconate and to ensure that the final product is stable.

After the neutralization stage, the solution is allowed to sit for a period of time to allow any remaining solids to settle to the bottom of the mixture.
The supernatant liquid is then carefully poured off, leaving behind a clear solution that is almost completely free of impurities.

In the evaporation stage, the solution is evaporated under vacuum to remove any remaining water.
This step is important because it helps to improve the purity of the final product and to increase its solubility in water.

Finally, in the drying stage, the evaporated solution is dried using a vacuum drier or an oven.
The dried product is then ground to a fine powder, which is the final product: Calcium Gluconate Monohydrate.

The production process of Calcium Gluconate Monohydrate is a carefully designed and controlled process that is intended to ensure the quality and purity of the final product.
The production process is carried out in a series of stages, including preparation, mixing, neutralization, evaporation, and drying.
Each stage is carefully designed to ensure that the final product is consistent and pure, and that it meets all relevant specifications and standards.