The safe operation and maintenance of the full automatic packaging machine for band aid

Band aid automatic packaging machine is used for band aid molding and automatic packaging, that is, to automatically peel, paste, compound, package, cut and shape adhesive tape, absorbent pad, stripping paper, release paper and other roll materials It is controlled by micro-computer It adopts advanced and fixed length, positioning control system, LCD display and optical fiber benchmarking No noise, automatic tension control, no stretching of finished products, automatic packaging, frequency control, easy operation and stable performance The correct operation and maintenance of the full-automatic band aid packaging machine is equally important Today's editor will introduce the safe operation and maintenance of the full-automatic band aid packaging machine to you: 1 When you start the machine every day, you must check whether the ultrasonic frequency is normal 2 The tightness of chain or belt must be tested every month If there is any looseness, it should be adjusted immediately, and the old butter should be removed and new butter added every half a year 3 The fixing screws, bolts, keys and pins on the rotating and sliding mechanism are easy to vibrate and loosen Please pay attention to them from time to time and conduct fixing inspection every month 4 It is not allowed to wear large and wide clothes at work The cuffs should be tied tightly and the work cap should be worn well It is not allowed to work bareback or wear slippers 5 When inspecting or repairing the machine, the machine must be stopped to prevent accidents 6 Keep the inside and outside of the machine clean and free of sundries 7 Cutter device: do not reach for or touch the device when the machine is running, so as to avoid being hit and cut 8 Clamp clamping device: when the machine is running, please do not reach between the devices to avoid injury 9 When the machine is running, do not reach over the welding head to avoid crushing 10 When the machine is running, do not touch the ultrasonic vibrator and fan by hand to avoid scalding 11 When there are two people working together for disassembly and assembly, they should care about and cooperate with each other, especially before starting the machine, they should say hello to each other and start the machine after confirming the safety 12 In case of any abnormal noise or peculiar smell of the machine motor, stop the machine immediately and find out the cause carefully before starting the machine 13 Please do not open the electric box and ultrasonic system for non professionals or maintenance personnel 14 Please wear and adjust the material when the machine is stopped 15 When the production on duty is completed, pay attention to the cleaning and inspection of the machine.