The use of electrothermal distiller

I usage: 1 Open the fastening clip on the instrument, take off the condenser, inject sufficient water into the evaporation pot, and stop the water injection after the water level rises to the middle of the water level mirror Then install the condenser, fasten the clip, and then install all kinds of water inlet and outlet rubber pipes, turn on the water source, and start heating with electricity 2 Before connecting the power supply, pay attention that the voltage is consistent with the rated voltage of the instrument, connect the ground wire, and then heat it for use 3 The condenser is made of metal material, so the distilled water produced after preheating for about 10-16 hours can be used After 30 minutes preheating, distilled water can be used 4 Drain the remaining water after use, clean it and keep it dry and clean 2 Precautions and problems: 1 It is necessary to ensure stable water pressure, which will affect the distillation effect of the instrument When the instrument is working, Zui shall fully unscrew the steam control valve 2 The surface of the heating pipe needs to be cleaned up frequently If the scale is too thick, the heating pipe will be damaged 3 The bottom of the instrument is equipped with an electrical part Do not place the instrument in water or in a place with excessive humidity during use 4 The inner diameter of all kinds of rubber tubes used by the instrument shall not be less than the inner diameter of the instrument interface The hose shall not be coiled or extruded to ensure smooth water flow The drain pipe or distilled water pipe is not easy to be too long It is not allowed to put the outlet into the water to avoid contacting the liquid level 5 During the use of the distiller, pay attention to observe the liquid level If the liquid level keeps falling, first turn off the power, check whether the faucet is on or check whether the return water is smooth If the water is cut off or the water level is lower than that of the heating pipe, the heating pipe will burst and leak, which will cause serious danger If the water level keeps rising and boils suddenly, first turn off the power supply and turn off the water source It is preliminarily determined that the heating pipe is burnt, and notify the electrician for maintenance Shangyu Star Instrument Equipment Co., Ltd is located in Daoxu Town, Shangyu District, Shaoxing City, Zhejiang Province It is an enterprise integrating production, product development, processing and trade The company's main products: drying box series, incubator series, laboratory muffle furnace series, distiller series, as well as clean workbench, air shower room, ventilation cabinet, biosafety cabinet and other complete sets of purification equipment The company has a strong technical research and development team, a strong after-sales service system, is the leading manufacturer of complete set of laboratory equipment in China, welcome customers to buy.