-
Categories
-
Pharmaceutical Intermediates
-
Active Pharmaceutical Ingredients
-
Food Additives
- Industrial Coatings
- Agrochemicals
- Dyes and Pigments
- Surfactant
- Flavors and Fragrances
- Chemical Reagents
- Catalyst and Auxiliary
- Natural Products
- Inorganic Chemistry
-
Organic Chemistry
-
Biochemical Engineering
- Analytical Chemistry
- Cosmetic Ingredient
-
Pharmaceutical Intermediates
Promotion
ECHEMI Mall
Wholesale
Weekly Price
Exhibition
News
-
Trade Service
Heat dissipation
coating
paint on grain and oil storage, summer to reduce the temperature in the warehouse more than 5 degrees C, saving a lot of back storage, ventilation, cooling losses. Heat dissipation brush on the oil tank pipeline, replace or partially replace the traditional spray cooling, reduce the oil breathing loss, extend the life of the anti-corrosion layer, reduce the waste of electricity and water resources; Thermal coating brush ah communication base station, mobile, Unicom and telecommunications base station applications, can greatly reduce the energy consumption of air conditioning.
the above, if you accelerate the rate of cooling of the object heat, it will increase the amount of radiation of the object, but also to reduce the "ethecity" of radiation. In the case of small changes in the temperature of the object, the object's own radiation is limited, so that the surface of the object must be covered with a material, the wavelength of radiation of this material is relatively short, the radiation away from the heat than the object itself radiation away from the heat is much larger, and this material can very well break the radiation "eochity", so that the object can accelerate the cooling of heat. Now by Beijing Zhisheng Weihua Chemical Co. , Ltd. after many years of research and development ZS-411 radiation cooling coating, this thermal coating is a radiation away from the heat of the object and heat insulation waterproof coating, temperature resistance range in -50-600 degrees C, paint directly painted on the surface of the object to cool down, radiation cooling And can be very good insulation, science and technology leading Weihua thermal coating thermal conductivity of only 0.03w/mk, the coating can be 0.5-13.5 m infrared wavelength to the object in the space automatically radiated away from the heat painted on the object, reduce the surface and internal temperature of the object, thermal cooling is obvious. If the space temperature is greater than the membrane surface temperature, on the one hand, the membrane-facing radiation heat accelerates, on the other hand, the nano-hollow ceramic microbeads in the dry film layer composed of vacuum cavity group can form an effective insulation barrier, can reduce heat transmission by more than 30%. When the object constant temperature is 60 degrees C paint Zhisheng brand radiation cooling coating before and after the temperature difference of 10 degrees C, when the object constant temperature is 300 degrees C paint Zhisheng brand radiation cooling coating before and after the temperature difference of 70 degrees C, the cooling range is obvious. ZS-411 radiation cooling coating radiation heat dissipation is not affected by space media, can be used in a vacuum environment, ZS-411 radiation cooling coating in radiation cooling, but also has a good self-cleaning, insulation, corrosion resistance, water resistance, acid-base, construction convenience characteristics, ZS-411 radiation cooling is known as energy-free, noise-free, pollution-free "air conditioning coating."