Titanium rod filter element is suitable for gas-liquid filtration of various media

Titanium rod filtration refers to the filtration equipment with titanium rod as the filter element.
Titanium rod is a tubular filter element made of titanium powder sintered at high temperature, also known as titanium filter element
.

It has the advantages of high filtration precision, large filtration flow, no adsorption, no shedding, corrosion resistance, high temperature resistance,
etc.

The titanium rod filtering equipment is called titanium rod filter element, which is made of 304 or 316L stainless steel, mirror-polished inside and out, and conforms to GMP standards
.

Titanium rod filter element filter adopts titanium powder sintered filter element, which is generally used for coarse filter or middle filter
.

The filtration system is small in size, light in weight, easy to use, has the characteristics of large filtration area, long service life, fast filtration speed and no pollution, and is suitable for gas-liquid filtration of various media
.

It has strong chemical corrosion resistance, high temperature resistance, can be repeatedly cleaned, and has a wide range of applications.
It has been widely used in food, chemical, petroleum, pharmaceutical, water treatment and other industries
.

Especially the decarbonization filtration in the production of large infusions and small injections in the pharmaceutical industry: there is no adsorption loss in the filtrate, adsorbent and catalyst
.

1.
The filter element has excellent corrosion resistance
.

This product has excellent corrosion resistance in citric acid, strong oxidant, organic matter and alkali solution
.

2.
Heat resistance of the filter element: maximum high temperature resistance of 300°C 3.
The filter element can be used in general and can filter a variety of substances
.

　　　　4.
The filter element has excellent physical properties, light weight and firmness
.

　　　　5.
The filter element has high filtration efficiency: 95-99.
9%
.

　　　　6.
Low pressure difference between filter element and filter: the original rated value is 0.
03mpa
.

　　　　7.
The total flow of the filter element is large
.

　　　　8.
The filter element has a long service life, up to 2000 days according to all normal actual operation
.

　　　　9.
The filter element is easy to soften and can be recycled
.

　　　　After the titanium rod filter element is used for a period of time, the titanium rod filter element will be blocked to a certain extent, indicating that the flow rate decreases and the pressure at the front end of the filter element increases
.

For example, when the pressure rises from less than 0.
22pa to more than 0.
3MPa, the filter element should be cleaned
.

The cleaning methods are generally as follows: For the newly used filter element, the method of clean water backwashing and gas backwashing is generally used for cleaning, that is, water slightly higher than the working pressure (such as 0.
3MPa) is injected into the opposite direction
.

The backflush time is about 1-3 minutes
.

When the filtration effect is not good after repeated backwashing, it can be soaked in hydrochloric acid solution below 5%, sulfuric acid solution below 8% or NaOH solution below 10% at room temperature, and then rinsed with clean water
.