-
Categories
-
Pharmaceutical Intermediates
-
Active Pharmaceutical Ingredients
-
Food Additives
- Industrial Coatings
- Agrochemicals
- Dyes and Pigments
- Surfactant
- Flavors and Fragrances
- Chemical Reagents
- Catalyst and Auxiliary
- Natural Products
- Inorganic Chemistry
-
Organic Chemistry
-
Biochemical Engineering
- Analytical Chemistry
- Cosmetic Ingredient
-
Pharmaceutical Intermediates
Promotion
ECHEMI Mall
Wholesale
Weekly Price
Exhibition
News
-
Trade Service
Ureteral dynamic friction tester 1.
Product overview: It is composed of programmable controller, touch screen, pressure sensor, pressure device, on-board printer, etc.
, Chinese and English menu display, and man-machine dialogue to set various parameters to automatically run the test
.
Production units, batches can be arbitrarily input, easy to operate
.
And the use of three-level password, information security and reliability
.
Product specifications, test pressure value setting, holding time setting, print setting, test, pressurization, decompression, time, calibration, verification,
etc.
Onboard print test data
.
Real-time display of test pressure value, hold time and other data
.
And the test data and results are printed out by the printer
.
Suitable for infusion sets, blood transfusion sets, infusion needles, anesthesia pack filters, pipelines, catheters, quick connectors,
etc.
2.
The test standard mainly uses YYT 0872-2013.
3.
Technical parameters Greater than ±1% of reading
.
3 Test duration: 0.
1 seconds to 99.
9 minutes, the error is not more than ± 0.
1S
.
4 Product net weight: 12kg5 Dimensions: 430×590×370 (mm) 6 Power supply: AC90V-240V/50Hz (adaptive wide voltage) 7 Machine power: 70W8 Programmable controller: PLC+ARM9 Touch screen: 7 inch K600+ core / Dot matrix 65 colors 800*480 resolution 10 Speed range: 0-800mm/min can be selected according to customers Four, configuration list Fixture 1 set of pressure measuring mechanism: built-in printer: on-board needle printer
Product overview: It is composed of programmable controller, touch screen, pressure sensor, pressure device, on-board printer, etc.
, Chinese and English menu display, and man-machine dialogue to set various parameters to automatically run the test
.
Production units, batches can be arbitrarily input, easy to operate
.
And the use of three-level password, information security and reliability
.
Product specifications, test pressure value setting, holding time setting, print setting, test, pressurization, decompression, time, calibration, verification,
etc.
Onboard print test data
.
Real-time display of test pressure value, hold time and other data
.
And the test data and results are printed out by the printer
.
Suitable for infusion sets, blood transfusion sets, infusion needles, anesthesia pack filters, pipelines, catheters, quick connectors,
etc.
2.
The test standard mainly uses YYT 0872-2013.
3.
Technical parameters Greater than ±1% of reading
.
3 Test duration: 0.
1 seconds to 99.
9 minutes, the error is not more than ± 0.
1S
.
4 Product net weight: 12kg5 Dimensions: 430×590×370 (mm) 6 Power supply: AC90V-240V/50Hz (adaptive wide voltage) 7 Machine power: 70W8 Programmable controller: PLC+ARM9 Touch screen: 7 inch K600+ core / Dot matrix 65 colors 800*480 resolution 10 Speed range: 0-800mm/min can be selected according to customers Four, configuration list Fixture 1 set of pressure measuring mechanism: built-in printer: on-board needle printer
